Omron E2E-X2D1-U 2M: 2 Wire DC Proximity Sensor in Chennai
The Omron 2 wire DC proximity sensor E2E-X2D1-U 2M Technical Specifications are:
- Sensor Head (Dia): M8 (8mm)
- Installation: Flush | Shielded
- Sensing Distance: 2 mm
- Connection Method: Pre-wired models (2 m)
- Cable Specifications: PUR (increased oil-resistant)
- Switching: NO
- Output Configuration: DC 2 Wire
- Power Supply Voltage: 12 to 24 VDC
Omron 2 wire DC proximity sensor E2E-X2D1-U 2M Technical Specification:
Sensor Head (Dia) | M8 (8mm) |
Installation | Flush | Shielded |
Sensing Distance | 2 mm |
Connection Method | Pre-wired models (2 m) |
Cable Specifications | PUR (increased oil-resistant) |
Switching | NO |
Output Configuration | DC 2-wire models |
Differential travel | 15% max. of sensing distance |
Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
Standard sensing object | Iron, 8 × 8 × 1 mm |
Response frequency | 1.5 kHz |
Power supply voltage | 12 to 24 VDC, ripple (p-p): 10% max. (10 to 30 VDC) |
Leakage current | 0.8 mA max |
Indicator | Operation indicator (red) and setting indicator (green) |
Protection circuit | Surge suppressor, Load short-circuit protection (for control and diagnostic output) |
Ambient air temperature | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
Ambient humidity | Operating/storage: 35% to 95% (with no condensation) |
Voltage influence | ±1% max. of sensing distance at a rated voltage in the rated voltage ±15% range |
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
Material Case | Stainless steel (SUS303) |
Material Sensing surface | PBT |
Find Omron 2-wire DC proximity sensor E2E-X2D1-U 2M at IndMALL Automation. This sensor M8 sensor head, shielded flush installation, 2mm sensing distance, PUR cables, DC 2-wire models, 12-24 VDC power supply, NO, and Pre-wired models (2 m). Omron E2E-X2D1-U 2M proximity sensors are available for outstanding deals for your purchase with attractive offers now in Chennai.