Pepperl Fuchs ML100-8-1000-RT/103/115 Diffuse Sensors
The ML100-8-1000-RT/103/115 Technical Specifications are as follows:
- Type: Diffuse photoelectric sensor
- Operating Voltage: 10-30VDC
- Sensing Distance: 1000mm (1 meter)
- Output: PNP
- Light: Visible Red Light
- Switching Frequency: 1000Hz
- Electrical Connection: 2-meter cable type
₹2,050.00
In stock
Pepperl Fuchs ML100-8-1000-RT/103/115 Technical Specifications:
Pepperl Fuchs ML100-8-1000-RT/103/115 Photoelectric Switch is a potential solution if you are in need of a plastic-housed Diffuse mode sensor. This sensor has an adjustable detection range of 1000mm, operates with LED red, and can function in both light and dark conditions. The output is PNP and comes with a fixed cable. Consider this product for your application needs.
| Detection range | 0 … 1000 mm |
| Adjustment range | 100 … 1000 mm |
| Reference target | standard white, 100 mm x 100 mm |
| Light type | modulated visible red light |
| Light source | LED |
| Diameter of the light spot | approx. 75 mm at a distance of 1000 mm |
| Polarization filter | no |
| Opening angle | approx. 2 ° |
| Optical face | frontal |
| Ambient light limit | EN 60947-5-2:2007+A1:2012 |
| MTTFd | 860 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Function indicator | LED yellow, lights up with receiver lit |
| Operation indicator | LED green: power on |
| Control elements | Light-on/dark-on changeover switch |
| Control elements | sensitivity adjustment |
| Ripple | max. 10 % |
| No-load supply current | < 20 mA |
| Operating voltage | 10 … 30 V DC |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Switching type | The switching type of the sensor is adjustable. The default setting is: light-on |
| Switching voltage | max. 30 V DC |
| Voltage drop | ≤ 1.5 V DC |
| Switching current | max. 100 mA, resistive load |
| Response time | 0.5 ms |
| Switching frequency | 1000 Hz |
| Product standard | EN 60947-5-2 |
| Ambient temperature | -30 … 60 °C (-22 … 140 °F) |
| Storage temperature | -40 … 70 °C (-40 … 158 °F) |
| Housing width | 11 mm |
| Housing depth | 20 mm |
| Housing height | 31 mm |
| Degree of protection | IP67 |
| Connection | 2 m fixed cable |
| Material Housing | PC (Polycarbonate) |
| Material Optical face | PMMA |
| Mass | approx. 50 g |
| Tightening torque, fastening screws | 0.6 Nm |
| Cable length | 2 m |
| EAC conformity | TR CU 020/2011 |
| UL approval | cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according to UL248), Type 1 enclosure |
| CCC approval | CCC approval/marking is not required for products rated ≤36 V |
Product Documentation: ML100-8-1000-RT/103/115
Here is the main technical specification of Pepperl Fuchs Photoelectric Sensor ML100-8-1000-RT/103/115: Diffuse photoelectric sensor, Sensing: 1000mm, PNP, cable type
If you want to know all ranges of Pepperl Fuchs photo sensors you can check.
Related Products: ML100-8-1000-RT/103/115
OBT200-18GM60-E5-V1
Type: Diffuse mode Photosensor, Detection range: 0 … 200 mm, class 2, Switching type: Light/dark-on, electrically switchable, Signal output: 1 PNP output, short-circuit protected, Light source: IRED (Infrared Emitting Diode), 880 nm, reverse polarity protected, open collector, Switching voltage: Max. 30 V DC, Switching frequency: 500 Hz, Response time: 1 ms, Housing (WxHxD): Not specified, Connection: 4-pin, M12 x 1 connector, Housing material: Brass, nickel-plated, Operating voltage: 10 … 30 V DC, Degree of protection: IP67.
OBT500-18GM60-E5-V1
Type: Diffuse mode Photosensor, Operating voltage: 10 … 30 V DC, class 2, Switching type: Light/dark-on, Detection range: 0 … 500 mm, Light source: IRED (Infrared Emitting Diode), 880 nm, electrically switchable, Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collector, Switching voltage: Max. 30 V DC, Switching current: Max. 100 mA, Switching frequency: 500 Hz, Degree of protection: IP67, Connection: 4-pin, M12 x 1 connector, Response time: 1 ms, Voltage drop: ≤ 2.5 V, Housing material: Brass, nickel-plated.
OBT350-R100-2EP-IO-V31
Type: Triangulation sensor, Detection range: 5 … 350 mm, Light source: LED, modulated visible red light, Switching type: Adjustable switching type, default setting: light-on, Signal output: 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected, Housing (WxHxD): 11 mm x 44.5 mm x 21.5 mm, Connection: M8 x 1 connector, 4-pin, Housing material: PC (Polycarbonate), Switching frequency: 500 Hz, Response time: 1 ms, Operating voltage: 10 … 30 V DC, Degree of protection: IP67 / IP69 / IP69K.
OBP120-R100-2EP-IO-V31-L
Type: Trigger Marks Sensor PhotoSensor, Light source: Laser diode, modulated visible red light, Detection range: 25 … 120 mm, Switching type: Adjustable switching type, default setting: light-on, Signal output: 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected, Switching frequency: 3300 Hz, Response time: 125 µs, Housing (WxHxD): 11 mm x 44.5 mm x 21.5 mm, Connection: M8 x 1 connector, 4-pin, Housing material: PC (Polycarbonate), Operating voltage: 10 … 30 V DC, Degree of protection: IP67 / IP69 / IP69K.
ML100-8-H-350-RT/103/115
Type: Background suppression PhotoSensor, Light source: LED, modulated visible red light, Operating voltage: 10 … 30 V DC, Detection range: 5 … 350 mm, Switching type: Adjustable, default setting: light-on, Switching frequency: 500 Hz, Response time: 1 ms, Housing (WxHxD): 11 mm x 31 mm x 20 mm, Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collector, Connection: 2 m fixed cable, Housing material: PC (Polycarbonate), Cable Length: 2 m, Degree of protection: IP67.
