E2E-X2E1 2M | Omron 3 Wire Proximity Sensor in Chennai
+91 79955 44066 sales@indmall.in

E2E-X2E1 2M: Omron 3 Wire Proximity Sensor in Chennai

The technical specifications for the Omron 3 Wire Proximity Sensor E2E-X2E1 2M are:

  • Sensor Head (Dia): M12
  • Installation: Flush | Shielded
  • Sensing Distance: 2 mm
  • Connection Method: Pre-wired Models (2 m)
  • Cable Specifications: PVC (oil-resistant)
  • Switching: NO
  • Output Configuration: NPN, DC 3 Wire
  • Response Frequency: 1.5 KHz
  • Power Supply Voltage: 12 to 24 VDC

Omron 3 Wire Proximity Sensor E2E-X2E1 2M Technical Specification:

 

Sensor Head (Dia) M12
Installation Flush | Shielded
Sensing Distance 2 mm
Connection Method Pre-wired Models (2 m)
Cable Specifications PVC (oil-resistant)
Switching NO
Output Configuration NPN, DC 3 Wire
Differential travel 10% max. of sensing distance
Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal.)
Standard sensing object Iron, 12 ×  12 × 1 mm
Response frequency 1.5 KHz
Power supply voltage 12 to 24 VDC ripple (p-p) 10% max.
Leakage current 13 mA max
Indicator  Operation indicator (red)
Protection circuit Load short-circuit protection, Surge suppressor, Reverse polarity protection
Ambient air temperature Operating Storage: −40 to 85°C (with no icing or condensation)
Ambient humidity Operating/storage: 35% to 95% (with no condensation)
Voltage influence ±1% max. of sensing distance at the rated voltage in the rated voltage ±15% range
Degree of protection IEC 60529 IP67, in-house standards: oil-resistant
Material Case Stainless steel (SUS303)
Material Sensing surface PBT

Are you looking for the Omron E2E-X2E1 2M 3 Wire Proximity Sensor? You’ve found the right place. This sensor has an M12 head, flush shielded installation, 2 mm sensing distance, comes with 2m pre-wired models, oil-resistant PVC cable, Normally Open (NO) switching, NPN DC 3 wire output, and a 1.5 kHz response frequency. It best detects ferrous metals, especially iron of 12×12×1 mm size. Get the best prices for this sensor at IndMALL Automation in Chennai.