E2E-X2ME1 2M: M8 Inductive Proximity Sensor in Chennai
The technical specifications of Omron M8 Inductive Proximity Sensor E2E X2ME1 2M are as follows:
- Sensor Head Diameter: M8
- Installation: Non-Flush and Un-shielded
- Sensing Distance: 2mm
- Connection Method: Pre-wired 2M Length
- Cable Specification: PVC cable
- Switching: Normally Open (NO)
- Output Configuration: NPN, DC 3-Wire
- Power Supply Voltage: 12 to 24 VDC
Omron M8 Inductive Proximity Sensor E2E-X2ME1 2M Technical Specification:
Sensor Head (Dia) | M8 |
Installation | Non-Flush | Un-shielded |
Sensing Distance | 2 mm |
Connection Method | Pre-wired 2M Cable Length |
Cable Specifications | PVC (oil-resistant) |
Switching | NO |
Output Configuration | NPN, DC 3 Wire |
Differential travel | 10% max. of sensing distance |
Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
Standard sensing object | Iron, 12 × 12 × 1 mm |
Response frequency | 0.8 KHz |
Power supply voltage | 12 to 24 VDC ripple (p-p) 10% max. |
Leakage current | 13 mA max |
Indicator | Operation indicator (red) |
Protection circuit | Load short-circuit protection, Surge suppressor, Reverse polarity protection |
Ambient air temperature | Operating Storage: −40 to 85°C (with no icing or condensation) |
Ambient humidity | Operating/storage: 35% to 95% (with no condensation) |
Voltage influence | ±1% max. of sensing distance at the rated voltage in the rated voltage ±15% range |
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
Material Case | Stainless steel (SUS303) |
Material Sensing surface | PBT |
Omron M8 Inductive Proximity Sensor E2E X2ME1 2M. The Omron Proximity Sensor has an M8 head, non-flush unshielded installation, 2 mm sensing distance, Pre-wired 2M length, oil-resistant PVC cable, Normally Open (NO) switching, DC 3 Wire, NPN output, 0.8 kHz response frequency, and needs 12 to 24 VDC power supply. Get the best prices at IndMALL Automation, you’ll find these sensors at great prices in Chennai.