Omron E2E-X2E2 2M: Inductive Sensor M12 in Chennai
The technical specifications for the Omron E2E-X2E2 2M Inductive Sensor M12:
- Sensor Head Diameter: M12
- Installation: Flush (Shielded)
- Sensing Distance: 2 mm
- Connection Method: Pre-Wired Models (2 meters)
- Cable Specifications: PVC (Oil-Resistant)
- Switching: Normally Closed (NC)
- Output Configuration: NPN-DC 3 Wire
- Power Supply Voltage: 12 to 24 VDC
Omron E2E-X2E2 2M Inductive Sensor M12 Technical Specification:
Sensor Head (Dia) | M12 |
Installation | Flush | Shielded |
Sensing Distance | 2 mm |
Connection Method | Pre-wired Models (2 m) |
Cable Specifications | PVC (oil-resistant) |
Switching | NC |
Output Configuration | NPN, DC 3 Wire |
Differential travel | 10% max. of sensing distance |
Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
Standard sensing object | Iron, 12 × 12 × 1 mm |
Response frequency | 1.5 KHz |
Power supply voltage | 12 to 24 VDC ripple (p-p) 10% max. |
Leakage current | 13 mA max |
Indicator | Operation indicator (red) |
Protection circuit | Load short-circuit protection, Surge suppressor, Reverse polarity protection |
Ambient air temperature | Operating Storage: −40 to 85°C (with no icing or condensation) |
Ambient humidity | Operating/storage: 35% to 95% (with no condensation) |
Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range |
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
Material Case | Stainless steel (SUS303) |
Material Sensing surface | PBT |
If you are looking for the prices of the Omron E2E-X2E2 2M Inductive Sensor M12, you can confidently find the best rates in Chennai. This Sensor has an M12 head, flush installation, senses 2 mm, has oil-resistant PVC cable, NC switching, NPN, DC 3 wire output, and needs 12-24 VDC power. IndMALL Automation offers unbeatable pricing on the Omron E2E-X2E2 2M Inductive Sensors, ensuring top value for your purchase.