E2E-X2D1-M1TGJ-U 0.3M: PUR Cable Proximity Sensor in Chennai
The technical specifications for the Omron E2E-X2D1-M1TGJ-U 0.3M PUR Cable Proximity Sensor:
- Sensor Head (Dia): M8 (8mm)
- Installation: Flush | Shielded
- Sensing Distance: 2 mm
- Connection: M12 Pre-wired Smart click Connector (0.3m)
- Cable Type: PUR (enhanced oil-resistant)
- Switching: NO
- Output: DC 2 Wire
- Power Supply Voltage: 12 to 24 VDC
Omron E2E-X2D1-M1TGJ-U 0.3M PUR Cable Proximity Sensor Technical Specification:
Sensor Head (Dia) | M8 (8mm) |
Installation | Flush | Shielded |
Sensing Distance | 2 mm |
Connection Method | M12 Pre-wired Smart click Connector Models (0.3m) |
Cable Specifications | PUR (increased oil-resistant) |
Switching | NO |
Output Configuration | DC 2 Wire (No Self-diagnostic Output) |
Differential travel | 15% max. of sensing distance |
Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
Standard sensing object | Iron, 8 × 8 × 1 mm |
Response frequency | 1.5 kHz |
Power supply voltage | 12 to 24 VDC, ripple (p-p): 10% max. (10 to 30 VDC) |
Leakage current | 0.8 mA max |
Indicator | Operation indicator (red) and setting indicator (green) |
Protection circuit | Surge suppressor, Load short-circuit protection (for control and diagnostic output) |
Ambient air temperature | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
Ambient humidity | Operating/storage: 35% to 95% (with no condensation) |
Voltage influence | ±1% max. of sensing distance at a rated voltage in the rated voltage ±15% range |
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
Material Case | Stainless steel (SUS303) |
Material Sensing surface | PBT |
Looking for Omron E2E-X2D1-M1TGJ-U 0.3M PUR Cable Proximity Sensor in Chennai? You’re in the right place. This sensor features an M8 (8mm) head, flush shielded installation, 2 mm sensing, 0.3m M12 pre-wired smart click connector, enhanced oil-resistant PUR cable, Normally Open (NO) switching, DC 2 Wire output, and 12 to 24 VDC power supply. It’s best for detecting ferrous metals, optimally sensing iron sized 8 × 8 × 1 mm, with a 1.5 kHz response frequency. Get the best prices at IndMALL Automation.