Omron E2E-X20MD1 2M Proximity Sensor
Omron E2E-X20MD1 2M is an M30 unshielded inductive proximity sensor with a 20 mm sensing distance and a 0 to 16 mm setting distance. It uses a DC 2-wire NO output and a pre-wired 2 m oil-resistant PVC cable, operating from 12 to 24 VDC. Ferrous metal is the specified detectable object, with an iron 54 × 54 × 1 mm standard sensing object. Leakage current is 0.8 mA max., response frequency is 0.1 kHz, and differential travel is 10% max. of sensing distance. Red and green indicators provide operation and setting indication, while IP67 protection is specified. The E2E-X20MD1 belongs to the Proximity sensor family from Omron industrial sensors.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2E-X20MD1 2M |
Omron E2E-X20MD1 2M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M30 |
| Mounting | Unshielded |
| Sensing Distance | 20 mm |
| Setting Distance | 0 to 16 mm |
| Output Configuration | DC 2-Wire |
| Operation Mode | NO |
| Connection | Pre Wired, Length 2M |
| Cable Specifications | PVC (oil-resistant) |
| Power Supply Voltage | 12 to 24 VDC |
| Standard Target | Iron, 54 × 54 × 1 mm |
| Leakage Current | 0.8 mA max. |
| Differential Travel | 10% max. of sensing distance |
| Detectable Object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Response Frequency | 0.1 kHz |
| Indicator | Operation indicator (red) and setting indicator (green) |
| Protection Circuit | Surge suppressor, Load short-circuit protection (for control and diagnostic output) |
| Ambient Temperature Range | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
| Ambient Humidity Range | Operating/Storage: 35% to 95% (with no condensation) |
| Insulation Resistance | ±10% max. of sensing distance at 23°C in the temperature range of −25 to 70°C |
| Dielectric Strength | 50 MΩ min. (at 500 VDC) between current-carrying parts and case |
| Vibration Resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock Resistance | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions |
| Voltage Influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range |
| Degree Of Protection | IP67 |
| Weight | Approx. 175 g |
The Omron E2E-X20MD1 2M Proximity Sensor uses an M30 unshielded inductive configuration with a 20 mm sensing distance and a 0 to 16 mm setting distance. Its output is DC 2-wire with NO operation, connected through a pre-wired 2 m oil-resistant PVC cable and supplied from 12 to 24 VDC. Ferrous metal is the listed detectable object, with an iron 54 × 54 × 1 mm standard sensing object. Leakage current is 0.8 mA max., differential travel is 10% max. of sensing distance, and response frequency is 0.1 kHz. Red and green indicators show operation and setting status. A surge suppressor and load short-circuit protection are specified for the control and diagnostic output.
Operating temperature is -25 to 70°C and storage temperature is -40 to 85°C without icing or condensation. Operating and storage humidity is 35% to 95% without condensation. Temperature influence is ±10% max. of sensing distance at 23°C across -25 to 70°C. Insulation resistance is 50 MΩ min. at 500 VDC, dielectric strength is 1000 VAC for 1 minute, and voltage influence is ±1% max. within rated voltage ±15%. The model carries IP67 protection. For the same E2E-X20MD1 model family with the 20 mm sensing distance and a connector-based arrangement instead of the 2 m pre-wired cable, see E2E-X20MD1-M1G.
