E2E-X10D1-M1GJ 0.3M: Proximity Sensor 10mm in Chennai
The technical specifications for the Omron E2E-X10D1-M1GJ 0.3M Proximity Sensor 10mm are:
- Sensor Head (Dia): M30
- Installation: Flush | Shielded
- Sensing Distance: 10 mm
- Connection Method: M12 Standard Pre-wired Connector (0.3 m)
- Cable Specifications: PVC (oil-resistant)
- Switching: NO
- Output Configuration: DC 2 Wire (No Self-diagnostic Output)
- Power Supply Voltage: 12 to 24 VDC
Omron E2E-X10D1-M1GJ 0.3M Proximity Sensor 10mm Technical Specification:
Sensor Head (Dia) | M30 |
Installation | Flush | Shielded |
Sensing Distance | 10 mm |
Connection Method | M12 Standard Pre-wired Connector Models(0.3 m) |
Cable Specifications | PVC (oil-resistant) |
Switching | NO |
Output Configuration | DC 2 Wire (No Self-diagnostic Output) |
Differential travel | 15% max. of sensing distance |
Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
Standard sensing object | Iron, 30 × 30 × 1 mm |
Response frequency | 0.4 kHz |
Power supply voltage | 12 to 24 VDC, ripple (p-p): 10% max. (10 to 30 VDC) |
Leakage current | 0.8 mA max |
Indicator | Operation indicator (red) and setting indicator (green) |
Protection circuit | Surge suppressor, Load short-circuit protection (for control and diagnostic output) |
Ambient air temperature | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
Ambient humidity | Operating/storage: 35% to 95% (with no condensation) |
Voltage influence | ±1% max. of sensing distance at a rated voltage in the rated voltage ±15% range |
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
Material Case | Stainless steel (SUS303) |
Material Sensing surface | PBT |
Omron E2E X10D1 M1GJ 0.3M is an M30 diameter, shielded design proximity sensor with 10mm sensing distance, M12 pre-wired connectors with a 0.3-m cable length, operates on a DC 2-wire configuration, and offers Normally Open (NO) switching with a durable PVC cable. The pre-wired M12 Standard connector, also 0.3 meters in length, requires a 12 to 24 VDC power supply. For the most competitive prices on Omron E2E Inductive Sensors in Chennai, be sure to check out IndMALL Automation.