Omron E2E-X10MF1-M1: M18 Proximity Switch in Chennai
The technical specifications for Omron M18 Proximity Switch E2E-X10MF1-M1 are:
- Sensor Head (Dia): M18
- Installation: Non-Flush | Un-shielded
- Sensing Distance: 10 mm
- Connection Method: M12 Connector Models
- Switching: NO
- Output Configuration: PNP, DC 3 Wire
- Power Supply Voltage: 12 to 24 VDC
Omron M18 Proximity Switch E2E-X10MF1-M1 Technical Specification:
Sensor Head (Dia) | M18 |
Installation | Non-Flush | Un-shielded |
Sensing Distance | 10 mm |
Connection Method | M12 Connector Models |
Switching | NO |
Output Configuration | PNP, DC 3 Wire |
Differential travel | 10% max. of sensing distance |
Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
Standard sensing object | Iron, 30 × 30 × 1 mm |
Response frequency | 0.2 KHz |
Power supply voltage | 12 to 24 VDC ripple (p-p) 10% max. |
Leakage current | 13 mA max |
Indicator | Operation indicator (red) |
Protection circuit | Load short-circuit protection, Surge suppressor, Reverse polarity protection |
Ambient air temperature | Operating Storage: −40 to 85°C (with no icing or condensation) |
Ambient humidity | Operating/storage: 35% to 95% (with no condensation) |
Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range |
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
Material Case | Stainless steel (SUS303) |
Material Sensing surface | PBT |
If you’re searching for the Omron E2E-X10MF1-M1 Inductive Proximity Sensor in Chennai? You’ve come to the right place. IndMALL Automation is your ideal destination, offering it at highly competitive prices. This sensor is an Omron M18 Proximity Switch, designed for non-flush installation, with a 10mm sensing distance. It features an M12 Connector Models connection, normally open (NO) switching, PNP output, and a DC 3 Wire configuration. Operating on a 12 to 24 VDC power supply.