Home / Products / Fork Sensors / Leuze / Label Gap Sensor / GSX14E-1WT.3-M12
Leuze Ultrasonic Fork Sensor
GSX14E/1WT.3-M12
Brand Leuze Electronics
Model Number GSX14E/1WT.3-M12
Part Number 50142867
Sensor type Ultrasonic Forked Sensor
Leuze GSX14E/1WT.3-M12 Ultrasonic Sensor Technical Features:
The Leuze GSX14E 1WT 3 M12 model is an ultrasonic and optical forked sensor belonging to the GS 14 series, with a part number 50142867. It is designed as a forked sensor for label identification, with a label width of 4 mm for ultrasonic detection and 2 mm for optical detection, and a label gap of 2 mm. This sensor is equipped with a Connector M12 and requires a supply voltage within the range of 18 to 30 V DC.
Part Number | 50142867 |
Series | 14 |
Principle of Physics | optical and ultrasonics |
Application | Detection of non-transparent labels Detection of transparent labels |
Label width, min. | 4 mm ultrasonics / 2 mm optical |
Label gap, min. | 2 mm |
Medium | Transparent and not transparent |
Special version | ALC function (tracking) Manual fine-tuning of the switching threshold Teach input Warning output easyTeach function |
Light source | LED LED, Infrared |
Wavelength | 850 nm |
Transmitted-signal shape | Pulsed |
LED Group | Exempt group (in acc. with EN 62471) |
Supply voltage UB | 18 … 30 V DC |
Open-circuit current | 0 … 80 mA, Typical value |
Number of teach inputs | 1 Piece(s) |
Type | Teach input |
Voltage type | DC |
Switching voltage | high: ≥9V low: ≤ 2 V |
Input resistance | 15,000 Ω |
Active switching state | High |
Number of digital switching outputs | 2 Piece(s) |
Type | Digital switching output |
Voltage type | DC |
Switching current, max. | 100 mA |
Switching voltage | high: ≥(UB-2V) low: ≤ 2 V |
Load capacity | 0.01 µF |
Switching element | Transistor, Push-pull |
Switching(Output 1) principle | IO-Link / NPN light switching (switching in the gap), PNP dark switching (switching on the label) |
Switching(Output 2) principle | active low (normal operation high, event case low) |
Switching frequency | 2,000 Hz, ultrasonics / 9061 Hz optical |
Response time | 0.2 ms, ultrasonics / 0.05 ms optical |
Readiness delay | 300 ms |
Max. Bandgeschwindigkeit beim Teach-In | 50 m/min |
Type | IO-Link |
COM mode | COM3 |
Profile | Smart sensor profile |
Min. cycle time | COM3 = 0.5 ms |
Frame type | 2.5 |
Specification | V1.1 |
Device ID | 2501 |
SIO-mode support | Yes |
Number of connections | 1 Piece(s) |
Function | Signal IN Signal OUT Voltage supply |
Type of connection | Connector |
Thread size | M12 |
Type | Male |
Material | Metal |
No. of pins | 5 -pin |
Encoding | A-coded |
Plug outlet | Horizontal (parallel to belt movement) |
Design | Fork |
Mouth width | 4 mm |
Mouth depth | 80 mm |
Dimension (W x H x L) | 22 mm x 46.9 mm x 96 mm |
Housing material | Metal |
Metal housing | Diecast zinc, galvanic nickel coating |
Net weight | 270 g |
Housing color | Silver |
Type of fastening | Mounting thread Through-hole mounting |
Type of display | LED |
Number of LEDs | 6 Piece(s) |
Operational controls | Control buttons |
The function of the operational control | Dynamic teach on label carrier and label |
Ambient temperature, operation | 0 … 60 °C |
Ambient temperature, storage | -40 … 70 °C |
Degree of protection | IP 65 |
Product Documentation: GSX14E/1WT.3-M12
Related Products: GSX14E/1WT.3-M12
GS 63B/6.3,200-S8 – 50129248
Label Gap Sensor, Model No: GS 63B/6.3,200-S8, Part Number: 50129248, Series: Fork type GS 63, Principle of physics: Optical Sensor, Label width: 2 mm, Label gap: 2 mm, Light source: Infrared LED, Supply voltage: 10 to 30 VDC, Connection: Cable with Connector, Cable length: 200 mm, Thread size: M8, Number of pins: 4-pin.
GS 63B/6.01,200-S12 – 50128003
Label Gap Sensor, Model No: GS 63B/6.01,200-S12, Part Number: 50128003, Series: Fork type GS 63, Principle of physics: Optical Sensor, Label width: 2 mm, Label gap: 2 mm, Light source: Infrared LED, Supply voltage: 10 to 30 VDC, Connection: Cable with Connector, Cable length: 200 mm, Thread size: M12, Number of pins: 5-pin.
IGSU 14D/6D.3-S12 – 50126785
Label Gap Sensor, Model No: IGSU 14D/6D.3-S12, Part Number: 50126785, Series: Fork type GS 14, Principle of physics: Ultrasonic Sensor, Label width: 10 mm, Label gap: 2 mm, Supply voltage: 12 to 30 VDC, Connection: Connector type, Thread size: M12, Number of pins: 5-pin.
GS 61/6D,200-S12 – 50112427
Label Gap Sensor, Model No: GS 61/6D,200-S12, Part Number: 50112427, Series: Fork type GS 61, Principle of physics: Optical Fork Sensor, Label width: 2 mm, Label gap: 2 mm, Supply voltage: 10 to 30 VDC, Light source: Infrared LED, Connection: Cable with Connector, Cable length: 200 mm, Thread size: M12, Number of pins: 5-pin.
IGSU 14D/6.3G-S12 – 50127969
Label Gap Sensor, Model No: IGSU 14D/6.3G-S12, Part Number: 50127969, Series: Fork type GS 14, Principle of physics: Ultrasonic Fork Sensor, Label width: 10 mm, Label gap: 2 mm, Supply voltage: 12 to 30 VDC, Connection: Connector type, Thread size: M12, Number of pins: 5-pin.
GS 61/6.2-S8 – 50110108
Leuze Label Gap Sensor, Model No: GS 61/6.2-S8, Part Number: 50110108, Series: Fork type GS 61, Principle of physics: Optical Sensor, Label width: 2 mm, Label gap: 2 mm, Supply voltage: 10 to 30 VDC, Light source: Infrared LED, Connection: Connector type, Thread size: M8, Number of pins: 4-pin.
GS 63B/66.3-S8 – 50143910
Leuze Label Gap Sensor, Model No: GS 63B/66.3-S8, Part Number: 50143910, Series: Fork type GS 63, Principle of physics: Optical Fork Sensor, Label width: 2 mm, Label gap: 2 mm, Supply voltage: 10 to 30 VDC, Light source: Infrared LED, Connection: Connector type, Thread size: M8, Number of pins: 4-pin.
GS 63B/6D.3 – 50146327
Leuze Label Gap Sensor, Model No: GS 63B/6D.3, Part Number: 50146327, Series: Fork type GS 63, Principle of physics: Optical Fork Sensor, Label width: 2 mm, Label gap: 2 mm, Supply voltage: 10 to 30 VDC, Light source: Infrared LED, Connection: Cable type, Cable length: 2000 mm, Number of conductors: 5 -wire.
GSU12/G6.3-M8 – 50145982
Leuze Label Gap Sensor, Model No: GSU12/G6.3-M8, Part Number: 50145982, Series: Fork type GS 12, Principle of physics: Ultrasonic Sensor, Label width: 4 mm, Label gap: 2 mm, Supply voltage: 12 to 30 VDC, Connection: Connector type, Thread size: M8, Number of pins: 4-pin.
IGS 63B/6.3 – 50128013
Label Gap Sensor, Model No: IGS 63B/6.3, Part Number: 50128013, Series: Fork type IGS 63, Principle of physics: Optical Sensor, Label width: 2 mm, Label gap: 2 mm, Light source: Infrared LED, Supply voltage: 10 to 30 VDC, Connection: Cable type, Cable length: 2000 mm, Number of conductors: 5-wire.
IndMALL is offering the Leuze GSX14E/1WT.3-M12 Ultrasonic Fork Sensor, part number 50142867. This is an ultrasonic and optical forked sensor belonging to the GS 14 series, designed for label identification. It can detection of transparent and detection of non-transparent labels with a label width of 4 mm for ultrasonic detection and 2 mm for optical detection, and a label gap of 2 mm.
The Leuze GSX14E 1WT 3 M12 model has a special version with an ALC function for tracking, manual fine-tuning of the switching threshold, teach input, warning output, and easyTeach function. The light source of this sensor is an LED and infrared with a wavelength of 850nm, and the transmitted-signal shape is pulsed. The Leuze GSU14E/LGT.3-M12V sensor has an exempt group LED in accordance with EN 62471. The supply voltage for the sensor is 18 to 30V DC, and the open-circuit current is 0 to 80mA (typical value). The sensor has one teach input, and the voltage type is DC, with a switching voltage of high: ≥9V and low: ≤ 2 V. The active switching state is high.
The Leuze Ultrasonic Fork Sensor GSX14E-1WT.3-M12 model has two digital switching outputs with a voltage type of DC and a maximum switching current of 100mA. The switching voltage for Output 1 is high: ≥(UB-2V) and low: ≤ 2 V, while Output 2 principle is active low (normal operation high, event case low). The load capacity is 0.01 µF, and the switching element is transistor push-pull.
The switching principle for Output 1 is IO-Link/NPN light switching (switching in the gap) and PNP dark switching (switching on the label), while Output 2 is active low. The switching frequency is 2,000Hz for ultrasonics and 9,061Hz for optical detection, and the response time is 0.2ms for ultrasonic and 0.05ms for optical detection. The readiness delay is 300ms.
The Leuze GSX14E 1WT 3 M12 model is an IO-Link device with COM3 mode and supports SIO mode. It has one connector for signal IN, signals OUT, and voltage supply, with a type of connection being M12, male, and five-pin A-coded. The plug outlet is horizontal (parallel to belt movement), and the design is forked with a mouth width of 4mm and mouth depth of 80mm. The dimension of the sensor is 22mm x 46.9mm x 96mm, and the housing material is die-cast zinc with a galvanic nickel coating. The net weight is 270g, and the housing color is silver. The sensor can be mounted through a mounting thread or a through-hole mounting.
The Leuze GSX14E/1WT.3-M12V model has six LEDs and control buttons for operational controls. The function of the operational control is dynamic teach on label carrier and label. The sensor can operate in an ambient temperature range of 0 to 60°C and can be stored in a temperature range of -40 to 70°C. The degree of protection for the sensor is IP 65.