DVP40ES00R2: Delta 40 I/O Points PLC
Technical Specifications of DVP40ES00R2 Delta 40 I/O Points PLC:
| Spec | Value |
|---|---|
| Output Method | Relay |
| Power Supply | 100 ~ 240VAC (-15% ~ 10%); 50/60Hz + -5% |
| Number of Inputs and Type | 16 - Digital |
| Number of Outputs and Type | 12 - Relay |
| Power Consumption | 30VA |
DVP40ES00R2 Technical Specifications:
| Specification | Value |
|---|---|
| Output Method | Relay |
| Power Supply | 100 ~ 240VAC (-15% ~ 10%); 50/60Hz + -5% |
| Number of Inputs and Type | 16 - Digital |
| Number of Outputs and Type | 12 - Relay |
| Fuse Capacity | 2A/ 250VAC |
| Power Consumption | 30VA |
| Program Capacity | 16k Steps |
| Spike Voltage Durability | 1500VAC (Primary-secondary); 1500VAC (Primary-PE); 500VAC (Secondary-PE) |
| Insulation Impedance | >5 MΩ (all I/O point-to-ground: 500VDC) |
| Noise Immunity | ESD: 8 kV Air Discharge EFT: Power Line, 2 kV Digital I/O: 1 kV Analog & Communication I/O: 1 kV RS: 26 MHz~1GHz, 10V/m |
| Earth | The diameter of grounding wire shall not be shorter than that of the power supply cable. (When many PLCs are in use at the same time, please make sure every PLC is properly grounded.) |
| Storage /Operation Temperature | Storage: -25ºC ~70ºC (temperature) Operation: 0ºC ~55ºC (temperature) |
| Storage /Operation humidity | Storage: -25ºC ~70ºC (temperature) Operation: 0ºC ~55ºC (temperature) |
| Response Time | 10ms |
| Vibration/shock resistance | Standard: IEC1131-2, IEC 68-2-6(TEST Fc)/ IEC1131-2 & IEC 68-2-27 (TEST Ea) |
| Input Signal Voltage | 24VDC ±10% (5 mA) |
Looking for the Delta DVP40ES00R2 from the DVP-ES2 Series. It's powered by 100-240VAC and uses relay outputs. With 16 digital inputs and 12 relay outputs, it operates well in temperatures from 0°C to 55°C. It has a program capacity of 16K steps and a power consumption of 30VA. It also requires a 24VDC input signal. For competitive Delta PLC prices, check out IndMALL Automation.
