Omron S8VK-C06024 SMPS 24V 2.5A Power Supply
Omron S8VK-C06024 SMPS is a 60 W switch mode power supply designed to provide 24 VDC with 2.5 A rated output current. It accepts single-phase 100 to 240 VAC or 90 to 350 VDC input and operates at 50/60 Hz. Typical efficiency is specified at 88%, while a green output indicator provides operating status. The unit has an IP20 protection rating and supports installation within industrial control equipment according to the required panel arrangement. The 24 VDC output and 2.5 A capacity define the electrical configuration of this model. Within the S8VK-C Series, the S8VK-C06024 provides a 60 W, 24 VDC configuration. Compare other 24V industrial power supplies from Omron automation products.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8VK-C06024 |
Omron S8VK-C06024 SMPS 24V 2.5A Power Supply – Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 60 W |
| Output voltage | 24 VDC |
| Rated output current | 2.5A |
| Efficiency | 88% |
| Rated input voltage | Single-phase 100 to 240 VAC 90 to 350 VDC |
| Input Frequency | 50/60 Hz (47 to 450 Hz) |
| Current 115 VAC input | 1.0 A |
| Current 230 VAC input | 0.7A |
| Output Voltage adjustment range | –10% to 15% (with V.ADJ) |
| Overvoltage protection | Yes |
| Parallel operation | No |
| Ambient operating temperature | –25 to 60°C (Refer to Engineering Data) |
| Ambient operating humidity | 20% to 90% (Storage humidity: 10% to 95%) |
| Output indicator | Yes (color: green), lighting from 80% to 90% or more of rated voltage |
| Safety standards | UL Listed: UL508 (Listing)UL UR: UL No. 62368-1 (Recognition)cUL: CSA C22.2 No.107.1cUR: CSA C22.2 No.62368-1EN: EN 62477-1, EN 62368-1BIS: IS 13252 (Part1) |
| Degree of protection | IP20 by EN / IEC60529 |
The Omron S8VK-C06024 Power Supply provides 60 W rated power with a 24 VDC output and 2.5 A rated current. It accepts single-phase 100 to 240 VAC or 90 to 350 VDC input and has a stated efficiency of 88%. A green indicator provides operating status, while the enclosure carries an IP20 protection rating. These electrical values define a 24 VDC configuration where connected load voltage, current requirement, incoming source compatibility, installation arrangement, and available panel space should be considered together. Connected equipment should require 24 VDC and keep total current demand within the rated 2.5 A output.
The incoming AC or DC range determines source compatibility separately from the 24 VDC requirement of downstream equipment. Comparing models in the S8VK family should begin with output voltage, followed by required current and rated wattage. A higher-power model can remain at 24 VDC while providing substantially more output current. For a 120 W 24 VDC configuration delivering 5 A, compare the Omron S8VK-C12024.


