+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-C15012 Power Supply

Omron S8FS-C15012 SMPS is a 150 W switch mode power supply configured to provide 12 VDC for industrial control equipment. It delivers 12.5 A rated output current and uses single-phase input, direct mounting, and screw terminals for fixed panel installation. The metal-frame unit has a stated efficiency of 85% and supports 100 to 240 VAC rated input, with allowable ranges of 90 to 264 VAC and 254 to 373 VDC. Its dimensions are 38 mm wide, 97 mm high, and 199 mm deep, with the terminal block facing upward. Within the S8FS-C Series, the S8FS-C15012 provides a direct-mount 150 W, 12 VDC configuration. Compare other 150W 12V power supplies from Omron automation components.

Omron S8FS-C15012 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-C15012

Omron S8FS-C15012 Power Supply – Technical Specifications

SpecificationValue
Power rating150W
Output voltage12V
Rated output current12.5A
Terminal typeScrew
PhaseSingle
Number of output branches1
Allowable supply voltage DC254-373 V
Mounting methodDirect mounting
TypeMetal frame
Efficiency85%
Temperature range-20-60?
Rated supply voltage at AC 50 Hz100-240V
Height38mm
Width97mm
Depth199mm
FeaturesTerminal block facing upward
Allowable supply voltage AC90-264 V

The Omron S8FS-C15012 Power Supply provides 150 W rated power with a 12 VDC output and 12.5 A rated current for industrial control equipment. It uses single-phase input, direct mounting, and screw terminals for fixed panel installation. Rated supply voltage is 100 to 240 VAC, while allowable ranges extend from 90 to 264 VAC and 254 to 373 VDC. The metal-frame unit has a stated efficiency of 85%. Its enclosure measures 38 mm wide, 97 mm high, and 199 mm deep, with the terminal block facing upward. These specifications define the model as a higher-current 12 VDC power supply where current capacity, mounting surface, enclosure depth, incoming supply, and wiring clearance must be considered together.

The connected equipment should require 12 VDC and have combined current demand within the 12.5 A rating. Direct mounting means the available panel surface should be checked before installation rather than assuming compatibility with DIN rail layouts. The allowable AC and DC input ranges define the supported incoming supply conditions, while screw terminals provide fixed electrical connections. Its 199 mm depth is an important enclosure consideration, and the upward-facing terminal block requires suitable conductor clearance. When comparing models, output voltage should remain constant before evaluating current capacity, power rating, and physical installation requirements. For a lower-power direct-mount 12 VDC configuration rated at 100 W with 8.5 A output, see Omron S8FS-C10012J.