DVP01PU-H2: Delta PLC Single-Axis Positioning
The Technical Specifications of Delta PLC Single-Axis Positioning DVP01PU-H2:
- Power supply voltage: 24VDC
- Fuse capacity: ES: 2A/ 250VAC; SV: 2.5A/ 30VDC
- Max. The number of connected modules: 8 extension modules.
- Operating Temperature: 0°C ~ 55°C
- Servo position control module: (single axis, 200 kHz)
- Program capacity: 16K Steps
- High-speed pulse output: 200KHz pulse output
Delta PLC Single-Axis Positioning DVP01PU-H2 Technical Specifications:
| Max. I/O points | 512 |
| MPU points | 16 / 20 / 32 / 40 / 48 / 64 / 80 |
| Type | Positioning Module |
| Power supply voltage | 24V DC (-15% ~ +20%) |
| Fuse capacity | ES: 2A/ 250VAC; SV: 2.5A/ 30VDC |
| Max. the number of connected modules | EH2 series MPU can connect to max. a total of 8 extension modules. |
| Program capacity | 16K Steps |
| Module | Servo position control module (single axis, 200 kHz) |
| Output impedance | 200KΩ or 250Ω |
| External output points | Isolated by photocoupler. LED indicators for all I/O signals. Output points FP and RP are differential signals (5V) Output point CLR is transistor NPN open collector (5 ~24VDC, less than 20mA) |
| External input points | Isolated by photocoupler. LED indicators for all I/O signals. Input points START, STOP, LSP, LSN, DOG are contacts or transistor open collector (24VDC ± 10%, 5 ±1mA) Input points ΦA and ΦB are differential or transistor open collectors (5 ~ 24VDC, 6 ~ 15mA Input points PG0 are differential or transistor open collectors (5 ~ 24VDC, 6 ~ 15mA) |
| Pulse output methods | In 3 modes: Pulse/Dir, FP(CW)/RP(CCW), A/B; by differential output |
| Storage /Operation Temperature | Storage: -25ºC ~70ºC (temperature) Operation: 0ºC ~55ºC (temperature) |
| Storage /Operation humidity | 5%~95% (humidity) 5%~95% (humidity); pollution degree 2 |
| Vibration/shock immunity | International standards: IEC 61131-2, IEC 68-2-6 (TEST Fc)/IEC 61131-2 & IEC 68-2-27 (TEST Ea) |
Looking for the Delta PLC Single-Axis Positioning DVP01PU-H2. It’s part of the Delta DVP-EH3 Series and works with a 24VDC power supply. This module can connect up to 8 extension modules and operates between 0°C and 55°C. It’s designed for single-axis servo position control at 200 kHz and supports up to 512 I/O points. With a 16K step program capacity and 2-point 200KHz high-speed pulse output for 20 and 32-point models, it’s very efficient. For competitive prices, check IndMALL Automation.