Home / Products / Rotary Encoders / Autonics / E50S8 / E50S8-360-3-T-24
Autonics E50S8-360-3-T-24: 360 PPR Rotary Encoder
The Technical Specifications of the Autonics 360 PPR Rotary Encoder E50S8-360-3-T-24:
- Shaft outer diameter: Ø8mm
- Max. response frequency: 300kHz
- Max. allowable revolution: 5000rpm
- Starting torque: Max. 70gf.cm(max. 0.00686N.m)
- Resolution: 360P/R
- Control output: Totem pole
- Power supply: 12-24VDC
- Connection type: Axial cable type
- Protection structure: IP50
Autonics 360 PPR Rotary Encoder E50S8-360-3-T-24 Technical Specification:
| Type of Encoder | Diameter Ø50mm shaft type of incremental rotary encoder |
| Shaft outer diameter | Ø8mm |
| Resolution | 360P/R |
| Output phase | A, B, Z |
| Control output | Totem pole |
| Totem pole output | ● [Low] – Load current: Max. 30mA, Residual voltage: MAax. 0.4VDCᜡ ● [High] – Load current : Max. 10mA, Output voltage (power voltage 5VDCᜡ): Min. (power voltage-2.0)VDCᜡ, Output voltage (power voltage 12-24VDCᜡ): Min. (power voltage-3.0)VDCᜡ |
| Response time (rise/fall) Totem pole output | Max. 1㎲ (cable length: 2m, I sink=20mA) |
| Current consumption | Max. 80mA (disconnection of the load), Line driver output: Max. 50mA (disconnection of the load) |
| Insulation resistance | Over. 100MΩ (at 500VDC megger between all terminals and case) |
| Dielectric strength | 750VAC 50/60Hz for 1 minute (between all terminals and case) |
| Power supply | 12-24VDC ±5%(ripple P-P: max. 5%) |
| Connection type | Axial cable type |
| Environment_Ambient temperature | -10 to 70℃, storage: -25 to 85℃ |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 90% RH |
| Vibration | 1.5mm amplitude at a frequency of 10 to 55Hz in each X, Y, and Z direction for 2 hours |
| Shock | Approx. Max. 75G |
| Protection structure | IP50 (IEC standard) |
| Max. response frequency | 300kHz |
| Max. allowable revolution | 5000rpm |
| Starting torque | Max. 70gf.cm(max. 0.00686N.m) |
| Accessories | Ø8mm coupling, Bracket |
| Weight | Approx. 275g |
Are you searching for the Autonics E50S8-360-3-T-24? This encoder has an 8mm shaft diameter, a resolution of 360 PPR Rotary Encoder, achieving up to 5000rpm with a maximum response frequency of 300kHz and a starting torque of max. 70gf.cm. It features A, B, and Z output phases and a totem pole control output, operating on a 12-24VDC power supply, comes with an axial cable connection, and is IP50-protected. IndMALL Automation ensures the best prices for this Autonics Encoder.