+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VK-G24048 Power Supply

Omron S8VK-G24048 SMPS is a 240 W switch mode power supply designed to provide 48 VDC with 5 A rated output current. It accepts single-phase 85 to 264 VAC or 90 to 350 VDC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for panel installation and electrical connections. Efficiency is specified at 92%. A green output indicator provides operating status, and the enclosure carries an IP20 protection rating. The 48 VDC output and 5 A capacity define this model within the S8VK-G family. Within the S8VK-G Series, the S8VK-G24048 provides a 240 W, 48 VDC configuration. Compare other 48 VDC industrial power supplies from Omron control products.

Omron S8VK-G24048 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VK-G24048

Omron S8VK-G24048 Power Supply - Technical Specifications

SpecificationValue
Power rating240 W
Output voltage48 VDC
Rated output current5 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency92%
Rated input voltageSingle-phase, 85 to 264 VAC, 90 to 350 VDC
Rated input current2.4 A typ. (at 115 VAC input) 1.3 A typ. (at 230 VAC input)
Input Leakage current0.23 mA typ. (at 115 VAC input) 0.33 mA typ. (at 230 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (LED: Green)
Output voltage variable range?10% to 15% (with V. ADJ)
Start-up time290 ms typ. (at 115 VAC input) 290 ms typ. (at 230 VAC input)
Hold time43 ms typ. (at 115 VAC input) 44 ms typ. (at 230 VAC input)
Vibration resistance10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)?40 to 70°C
Ambient temperature (Storage)?40 to 85°C
Ambient humidity (OperatingStorage)95% max. (Storage humidity: 95% max.)
Cooling fanNo
Degree of protectionIP20 by EN/IEC 60529
Weight900 g max.

The Omron S8VK-G24048 Power Supply provides 240 W rated power with a 48 VDC output and 5 A rated current. It accepts single-phase 85 to 264 VAC or 90 to 350 VDC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for installation and wiring. Efficiency is specified at 92%, and a green indicator provides output-status information. The enclosure carries an IP20 protection rating. These values define the electrical and installation requirements for matching the supply to connected equipment. The load should require 48 VDC, and combined current demand should remain within the rated 5 A output. The incoming source must remain within the specified input range, while mounting space and terminal access should suit the panel layout. Input compatibility and output compatibility describe different sides of the power supply, so they should be checked separately. When comparing related models, output voltage should be checked first, followed by required current, rated power, mounting format, and connection type. A 24 VDC model is not a direct substitute for equipment requiring 48 VDC, even when both models have the same 240 W rating. For comparison, the Omron S8VK-WA24024 provides 240 W rated power with a 24 VDC output and 10 A rated current, showing a different voltage and current configuration.