+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VK-G48024 Power Supply

Omron S8VK-G48024 SMPS is a 480 W switch mode power supply designed to provide 24 VDC with 20 A rated output current. It accepts single-phase 85 to 264 VAC or 90 to 350 VDC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for panel installation. Efficiency is specified at 93%, while a green LED provides output-status indication. The enclosure carries an IP20 protection rating. Its 24 VDC output and 20 A capacity define a higher-current configuration within the S8VK-G family. Within the S8VK-G Series, the S8VK-G48024 provides a 480 W, 24 VDC configuration. Compare other 480W 24V power supplies from Omron industrial automation.

Omron S8VK-G48024 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VK-G48024

Omron S8VK-G48024 Power Supply - Technical Specifications

SpecificationValue
Power rating480 W
Output voltage24 VDC
Rated output current20 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency93%
Rated input voltageSingle-phase, 85 to 264 VAC, 90 to 350 VDC
Rated input current4.7 A typ. (at 115 VAC input) 2.3 A typ. (at 230 VAC input)
Input Leakage current0.3 mA typ. (at 115 VAC input) 0.49 mA typ. (at 230 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (LED: Green)
Output voltage variable range?10% to 15% (with V. ADJ)
Start-up time380 ms typ. (at 115 VAC input) 260 ms typ. (at 230 VAC input)
Hold time40 ms typ. (at 115 VAC input) 50 ms typ. (at 230 VAC input)
Vibration resistance10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)?40 to 70°C
Ambient temperature (Storage)?40 to 85°C
Ambient humidity (OperatingStorage)95% max. (Storage humidity: 95% max.)
Cooling fanNo
Degree of protectionIP20 by EN/IEC 60529
Weight1500 g max.

The Omron S8VK-G48024 Power Supply provides 480 W rated power with a 24 VDC output and 20 A rated current. It accepts single-phase 85 to 264 VAC or 90 to 350 VDC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for installation and wiring. Efficiency is specified at 93%, while a green LED provides output-status indication. The enclosure carries an IP20 protection rating. These values define a higher-current 24 VDC configuration where connected load voltage, total current demand, incoming source compatibility, DIN rail space, and terminal access should be reviewed together. Connected equipment should require 24 VDC and keep combined current demand within the rated 20 A output. The incoming AC or DC range describes source compatibility separately from the 24 VDC requirement of connected loads. When comparing related models, output voltage should be checked first, followed by rated current, power capacity, mounting arrangement, and terminal type. A lower-power model can remain within the same 24 VDC class while providing substantially less available current, making load demand the main selection difference after voltage compatibility is confirmed. For a lower-capacity DIN rail model providing 24 VDC at 1.3 A from 30 W rated power, compare the Omron S8VK-S03024.