Omron S8VK-R20 Power Supply
Omron S8VK-R20 Redundancy Unit is designed to manage redundant DC power arrangements supporting 10 to 60 VDC and up to 20 A rated current. It works with compatible DC power supplies where two power paths are arranged for redundancy rather than performing AC-to-DC conversion itself. A green LED provides operating-status indication, while a photo switch contact supports status signalling to external circuits. The unit carries an IP20 protection rating. Its 20 A current capacity distinguishes this model from the lower-current S8VK-R10 configuration. Within the S8VK-R Series, the S8VK-R20 provides the higher-current redundancy option. It supports products in the wider industrial SMPS range from Omron machine automation.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8VK-R20 |
Omron S8VK-R20 Power Supply – Technical Specifications
| Specification | Value |
|---|---|
| Rated output current | 20 A |
| Rated input voltage | 10 to 60 VDC |
| Rated input current | 0 to 20 A |
| Ambient operating temperature | -40 to 70°C (Refer to Engineering Data) |
| Ambient operating humidity | 0% to 95% (Storage humidity: 0% to 95%) |
| Output indicator | Yes (LED: Green) |
| Vibration resistance | 10 to 55 Hz, 0.375-mm half amplitude for 2 h each in X, Y, and Z directions |
| Shock resistance | 150 m/s2, 3 times each in ±X, ±Y, and ±Z directions |
| REDUNDANCY OK (Contat) | Yes, photo switch contact 30 VDC max., 50 mA max., residual voltage when ON: 2 V max., leakage current when OFF: 0.1 mA max. |
| Marine standards | LR standards |
| Degree of protection | IP20 by EN/IEC60529 |
| Weight | 495 g max. |
The Omron S8VK-R20 Redundancy Unit supports redundant DC power arrangements across a 10 to 60 VDC operating range with up to 20 A rated current. It is used with compatible DC supplies rather than as an AC-to-DC converter, so the electrical architecture differs from a standard switch mode power supply. A green LED provides operating-status indication, and the specified photo switch contact allows external status signalling. The enclosure carries an IP20 protection rating. Connected equipment and upstream supplies should operate within the supported DC voltage range, while combined load current should remain within the 20 A rating. Compared with the lower-current S8VK-R10, the higher current capacity allows the redundancy unit to serve DC systems with greater load demand. Selection should therefore focus on system voltage, total current requirement, number and rating of connected power sources, status-output requirements, and available panel space. Comparing this unit directly with an SMPS should also account for their different functions: the redundancy unit manages compatible DC power paths, while a power supply converts supported incoming power into a required DC output. For a 480 W power supply providing 24 VDC at 20 A, compare the Omron S8VK-C48024.


