Omron S8VK-C48024 SMPS 24V 20A Power Supply
Omron S8VK-C48024 SMPS is a 480 W switch mode power supply configured to provide 24 VDC with 20 A rated output current. It accepts single-phase 100 to 240 VAC or 90 to 350 VDC input and operates at 50/60 Hz. Typical efficiency is specified at 92%, and a green output indicator provides operating status. The 24 VDC output and 20 A capacity define this model as the higher-current configuration among the listed S8VK-C power levels. An IP20 protection rating is specified for the enclosure. Within the S8VK-C Series, the S8VK-C48024 provides a 480 W, 24 VDC configuration. Compare other 24V high-current power supplies from Omron industrial automation.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8VK-C48024 |
Omron S8VK-C48024 SMPS 24V 20A Power Supply – Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 480 W |
| Output voltage | 24 VDC |
| Rated output current | 20A |
| Efficiency | 92% |
| Rated input voltage | Single-phase 100 to 240 VAC 90 to 350 VDC |
| Input Frequency | 50/60 Hz (47 to 63 Hz) |
| Current 115 VAC input | 4.8 A |
| Current 230 VAC input | 2.4 A |
| Output Voltage adjustment range | –10% to 15% (with V.ADJ) |
| Overvoltage protection | Yes |
| Parallel operation | No |
| Ambient operating temperature | –25 to 60°C (Refer to Engineering Data) |
| Ambient operating humidity | 20% to 90% (Storage humidity: 10% to 95%) |
| Output indicator | Yes (color: green), lighting from 80% to 90% or more of rated voltage |
| Safety standards | UL Listed: UL508 (Listing)UL UR: UL No. 62368-1 (Recognition)cUL: CSA C22.2 No.107.1cUR: CSA C22.2 No.62368-1EN: EN 62477-1, EN 62368-1BIS: IS 13252 (Part1) |
| Degree of protection | IP20 by EN / IEC60529 |
The Omron S8VK-C48024 Power Supply provides 480 W rated power with a 24 VDC output and 20 A rated current. It accepts single-phase 100 to 240 VAC or 90 to 350 VDC input and has a stated efficiency of 92%. A green output indicator provides operating status, while the IP20 rating defines the enclosure protection level. These electrical values establish a higher-capacity 24 VDC configuration where connected load voltage, total current demand, incoming source compatibility, installation space, and wiring arrangement should be considered together. Connected equipment should require 24 VDC and keep combined current demand within the rated 20 A output.
Comparing this model with lower-power S8VK-C configurations should focus first on the common 24 VDC output and then on the current required by connected equipment. A lower-power model may be sufficient where combined load current remains substantially below 20 A. The higher wattage mainly provides greater available output current within the same voltage class. For a 120 W model supplying 24 VDC at 5 A, compare the Omron S8VK-C12024.


