+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VK-R10 Power Supply

Omron S8VK-R10 Redundancy Unit is designed for redundant DC power arrangements supporting 5 to 30 VDC input and up to 10 A output current. Unlike a standard switch mode power supply, it manages compatible DC sources rather than converting AC input into DC output. A green LED provides operating-status indication for the redundancy arrangement. Its electrical specification allows the unit to be used where connected equipment operates within the supported DC voltage and current range. The product also includes a photo switch contact for status signalling. Within the S8VK-R Series, the S8VK-R10 provides a 10 A redundancy configuration. It complements the wider industrial power supply range from Omron automation products.

Omron S8VK-R10 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VK-R10

Omron S8VK-R10 Power Supply – Technical Specifications

SpecificationValue
Rated output current10 A
Rated input voltage5 to 30 VDC
Rated input current0 to 10 A
Ambient operating temperature-40 to 70°C (Refer to Engineering Data)
Ambient operating humidity0% to 95% (Storage humidity: 0% to 95%)
Output indicatorYes (LED: Green)
Vibration resistance10 to 55 Hz, 0.375-mm half amplitude for 2 h each in X, Y, and Z directions
Shock resistance150 m/s2, 3 times each in ±X, ±Y, and ±Z directions
REDUNDANCY OK (Contat)Yes, photo switch contact 30 VDC max., 50 mA max., residual voltage when ON: 2 V max., leakage current when OFF: 0.1 mA max.
Marine standardsLR standards
Weight195 g max.

The Omron S8VK-R10 Redundancy Unit supports redundant DC power arrangements across a 5 to 30 VDC range with up to 10 A output current. Unlike a switch mode power supply, this unit does not convert an AC source into a fixed DC output. Instead, it is positioned between compatible DC power sources and the connected load to support a redundant power architecture. A green LED provides operating-status indication, while the specified photo switch contact can provide an external status signal. The connected system should remain within the supported voltage and current range, and upstream supplies should be selected according to the voltage required by the downstream equipment. Redundancy-unit current capacity should also be checked against the combined load because the 10 A rating defines the available current through the unit. This makes voltage range, total load current, source arrangement, panel space, and signalling requirements more relevant than conventional SMPS efficiency or AC-input comparisons. When comparing the S8VK-R10 with standard power supplies, the difference in product function should be considered first. A standard supply produces DC power, while this unit manages compatible DC sources in a redundant arrangement. For a 240 W power supply configuration providing 24 VDC at 10 A, compare the Omron S8VK-C24024.