Omron S8VK-S24024 Power Supply
Omron S8VK-S24024 SMPS is a 240 W switch mode power supply designed to provide 24 VDC with 10 A rated output current. It accepts single-phase 85 to 264 VAC or 90 to 350 VDC input, together with the specified 265 to 300 VAC range, at 50/60 Hz. DIN rail mounting supports panel installation, while push-in terminals and terminal blocks provide the electrical wiring arrangement. Typical efficiency is specified at 91% with 115 VAC input and 93% with 230 VAC input. A green LED indicates output status, and the enclosure has an IP20 protection rating. Within the S8VK-S Series, the S8VK-S24024 provides a 240 W, 24 VDC configuration. Compare other 240W industrial SMPS models from Omron automation equipment.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8VK-S24024 |
Omron S8VK-S24024 Power Supply - Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 240 W |
| Output voltage | 24 VDC |
| Rated output current | 10 A |
| Terminal type | Push-in Terminal |
| Mounting method | DIN rail |
| Connection | Terminal blocks |
| Efficiency | 91% typ. (at 115 VAC input) 93% typ. (at 230 VAC input) |
| Rated input voltage | Single-phase, 85 to 264 VAC, 90 to 350 VDC , 265 to 300 VAC |
| Rated input current | 2.4 A typ. (at 115 VAC input) 1.3 A typ. (at 230 VAC input) |
| Input Leakage current | 0.5 mA typ. (at 115 VAC input) 1 mA typ. (at 230 VAC input) |
| Input Frequency | 50/60 Hz |
| Output indicator | Yes (LED: Green) |
| Output voltage variable range | ?10% to 15% (with V. ADJ) |
| Start-up time | 1000 ms typ. (at 115 VAC input) 1000 ms typ. (at 230 VAC input) |
| Hold time | 35 ms typ. (at 115 VAC input) 35 ms typ. (at 230 VAC input) |
| Vibration resistance | 10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | ?40 to 70°C |
| Ambient temperature (Storage) | ?40 to 85°C |
| Ambient humidity (OperatingStorage) | 95% max. (Storage humidity: 95% max.) |
| Cooling fan | No |
| Degree of protection | IP20 by EN/IEC 60529 |
| Weight | 700 g max. |
The Omron S8VK-S24024 Power Supply provides 240 W rated power with a 24 VDC output and 10 A rated current. It accepts single-phase 85 to 264 VAC or 90 to 350 VDC input, together with the specified 265 to 300 VAC range, at 50/60 Hz. DIN rail mounting, push-in terminals, and terminal blocks provide the mechanical installation and electrical connection arrangement. Typical efficiency is specified at 91% with 115 VAC input and 93% with 230 VAC input. A green LED provides output-status indication, and the enclosure carries an IP20 protection rating. These values define a higher-current 24 VDC configuration where total load current should remain within the rated 10 A output. Input-source compatibility, output voltage, current requirement, DIN rail space, and terminal access should be checked before installation. Comparing other 24 VDC supplies should begin with voltage compatibility and then consider available current and rated wattage. A lower-power model can use the same nominal voltage but provide less current, while a higher-power model can increase available current without changing the load voltage. Connection technology may also differ between product families. For a 60 W DIN rail model providing 24 VDC at 2.5 A, compare the Omron S8VK-X06024-EIP.


