+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VK-T96024 Power Supply

Omron S8VK-T96024 SMPS is a 960 W switch mode power supply designed to provide 24 VDC with 40 A rated output current. It accepts three-phase or two-phase 380 to 480 VAC input at 50/60 Hz, with 450 to 600 VDC also specified as an input source. DIN track mounting supports cabinet installation, while rod terminals and terminal blocks provide the wiring interface. Typical efficiency is specified at 93% with three-phase 400 VAC input. The 120% Power Boost function provides up to 48 A under specified conditions. Within the S8VK-T Series, the S8VK-T96024 provides a high-capacity DIN track 24 VDC configuration. Compare other 960W industrial power supplies from Omron control products.

Omron S8VK-T96024 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VK-T96024

Omron S8VK-T96024 Power Supply – Technical Specifications

SpecificationValue
Power rating960 W
Output voltage24 VDC
Rated output current40 A
Terminal typeRod terminal
Mounting methodDIN track mounting
ConstructionCovered type
ConnectionTerminal blocks
Efficiency93% typ. (Three-phase 400 VAC input)
Rated input voltage380 to 480 VAC (Three-phase / two-phase)
Rated input current1.6 A type. (Three-phase 400 VAC input)
Input Leakage current3.5 mA max., 1.2 mA typ. (Three-phase 400 VAC input)
Input Frequency50/60Hz (47 to 63 Hz)
Output indicatorYes (LED, color: green, lighting from 80 to 90% or more of rated voltage)
Output voltage variable range24 to 29.5 VDC With V.ADJ
Maximum peak current48 A
Start-up time500 ms typ. (Three-phase 400 VAC input)
Hold time35 ms typ. (Three-phase 400 VAC input)
Vibration resistance10 to 55 Hz, 0.375 mm Single amplitude in every 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-40 to 70 ? (with no freezing or condensation)
Ambient temperature (Storage)-40 to 85 ? (with no freezing or condensation)
Ambient humidity (OperatingStorage)95% max.
Degree of protectionIP20, EN/IEC 60529
Weight (Main)2000 g max.

The Omron S8VK-T96024 Power Supply provides 960 W rated power with a 24 VDC output and 40 A rated current. It accepts three-phase or two-phase 380 to 480 VAC input at 50/60 Hz, with 450 to 600 VDC also specified as an input source. DIN track mounting, rod terminals, and terminal blocks provide structured installation and wiring inside an electrical cabinet. Typical efficiency is specified at 93% with three-phase 400 VAC input. The 120% Power Boost function allows output up to 48 A under specified conditions. These values define a high-capacity 24 VDC configuration where total connected current, incoming source, available DIN track space, and terminal access should be checked together. Normal connected load demand should remain within the 40 A rated output.

The 24 VDC output remains common across the principal S8VK-T power levels, so wattage and rated current can be compared after confirming load-voltage compatibility. A lower-power model may be suitable where total 24 VDC demand is substantially below 40 A. This avoids choosing capacity based only on the highest available wattage. For a lower-capacity DIN track model providing 24 VDC at 20 A, compare the Omron S8VK-T48024.