PLC-2RSC-24DC/ 1: 2987309 - Phoenix 2 x 1 N/O Contact Relay Module
Technical Specifications of Phoenix 2 x 1 N/O Contact Relay Module PLC-2RSC-24DC/ 1 2987309:
Spec | Value |
---|---|
Product type | Relay Module |
Nominal input voltage UN | 24 V DC |
Connection method | Screw connection |
Mounting type | DIN rail mounting |
Phoenix 24VDC Input Voltage Relay PLC-RPT- 24DC/21AU/MS, 2909672 Technical Specifications:
Specification | Value |
---|---|
Product type | Relay Module |
Product family | PLC-INTERFACE |
Application | two integrated relays |
Mechanical service life | 2x 107 cycles |
Insulation | Basic insulation |
Overvoltage category | III |
Pollution degree | 2 |
Maximum power dissipation for nominal condition | 0.17 W |
Test voltage (Winding/contact) | 3 kV AC (50 Hz, 1 min., winding/contact) |
Test voltage (Changeover contact/changeover contact) | - |
Rated surge voltage | 4 kV |
Nominal input voltage UN | 24 V DC |
Input voltage range | 18 V DC ... 33.6 V DC (20 °C) |
Drive and function | monostable |
Drive (polarity) | polarized |
Typical input current at UN | 7 mA |
Typical response time | 4 ms |
Typical release time | 6 ms |
Protective circuit | Reverse polarity protection; Polarity protection diode |
Operating voltage display | Yellow LED |
Contact switching type | 2 N/O contacts |
Type of switch contact | Single contact |
Contact material | AgNi |
Maximum switching voltage | 250 V AC |
Limiting continuous current | 3.5 A |
Maximum inrush current | 5 A |
Min. switching current | 5 mA |
Interrupting rating (ohmic load) max. | 84 W (at 24 V DC) |
Switching capacity | - |
Connection method | Screw connection |
Stripping length | 8 mm |
Conductor cross section rigid | 0.14 mm² ... 2.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
Conductor cross section AWG | 26 ... 14 |
Tightening torque | 0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing)) |
Width | 6.2 mm |
Height | 80 mm |
depth | 95 mm |
Color | gray (RAL 7042) |
Flammability rating according to UL 94 | V0 (Housing) |
Degree of protection (Relay) | - |
Degree of protection (Relay base) | IP20 (Relay base) |
Ambient temperature (operation) | -20 °C ... 60 °C |
Ambient temperature (storage/transport) | -20 °C ... 60 °C |
Temperature | - |
Humidity | - |
Vibration | - |
EMC | - |
Enclosure | - |
Low Voltage Directive | Conformance with Low Voltage Directive |
Electromagnetic compatibility | Conformance with EMC directive |
Standards/regulations | IEC 60664 |
Mounting Type | DIN rail mounting |
Mounting position | any |
Contact Connection type | - |
Output fuse | - |
Degree of protection (Installation location) | - |
Call us for Phoenix 2 x 1 N/O Contact Relay Module PLC-2RSC-24DC/ 1 part no: 2987309 at the best rates. Technical Attributes of PLC-2RSC-24DC/ 1, 2987309 are Relay Module type and PLC-INTERFACE Product family a versatile solution for two integrated relays applications. This relay module features a mechanical service life of 2x 107 cycles, ensuring durability and reliability. With a maximum power dissipation of 0.17 W, it operates efficiently at a nominal input voltage of 24 V DC, within an input voltage range of 18 V DC ... 33.6 V DC (20 °C). The module has a typical input current of 7 mA at UN, with a response time of 4 ms and a release time of 6 ms. It is equipped with a Reverse polarity protection; Polarity protection diode for protection and includes 2 N/O contacts made from Screw connection Connection method. Unlock Exclusive Pricing with a Quote for your requirement of Phoenix 2 x 1 N/O Contact Relay Module. Trust in our ability to provide more advantageous pricing and dedicated support beyond other other Dealers.