+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VS-48024A Power Supply

Omron S8VS-48024A SMPS is a 480 W switch mode power supply configured to deliver 24 VDC with 20 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for control-panel installation. Screw terminals and terminal blocks provide input and output wiring connections. Typical efficiency is specified at 89% with 100 VAC input and 93% with 200 VAC input. A green output indicator provides operating status. The 24 VDC output and 20 A capacity provide a higher-current configuration than the 240 W models in the same family. Within the S8VS Series, the S8VS-48024A provides a DIN rail 480 W, 24 VDC configuration. Compare other 480W 24V power supplies from Omron control solutions.

Omron S8VS-48024A Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VS-48024A

Omron S8VS-48024A Power Supply - Technical Specifications

SpecificationValue
Power rating480 W
Output voltage24 VDC
Rated output current20 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency89% typ. (at 100 VAC input) 93% typ. (at 200 VAC input)
Rated input voltage100 to 240 VAC
Rated input current7.4 A max., 5.8 A typ. (at 100 VAC input) 3.9 A max., 2.8 A typ. (at 200 VAC input)
Input Leakage current0.5 mA max. (at 100 VAC input) 1.0 mA max. (at 200 VAC input)
Input Frequency50/60Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15% With V.ADJ
Start-up time550 ms typ. (at 100 VAC input) 550 ms typ. (at 200 VAC input)
Hold time37 ms typ. (at 100 VAC input) 41 ms typ. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-10 to 60 ?
Ambient temperature (Storage)-25 to 65 ?
Ambient humidity (OperatingStorage)25 to 85%
Cooling fanNo
Weight1700 g max.

The Omron S8VS-48024A Power Supply provides 480 W rated power with a 24 VDC output and 20 A rated current. It operates from 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for organized cabinet installation. Typical efficiency is specified at 89% with 100 VAC input and 93% with 200 VAC input. These electrical values define a high-capacity 24 VDC supply where connected equipment voltage, continuous current demand, source compatibility, rail space, and terminal access should be considered together. Connected loads should require 24 VDC and stay within the rated 20 A output during continuous operation. The green output indicator provides a direct visual reference for the supply status. The fixed screw-terminal format provides defined wiring points for the input and output circuits.

Comparing this model with lower-power 24 VDC units is useful when the connected load does not require 20 A. A 180 W configuration provides 7.5 A while retaining the same nominal output voltage and DIN rail mounting format. This keeps the comparison focused on actual current demand rather than maximum available wattage. For a lower-capacity DIN rail model delivering 24 VDC at 7.5 A, compare the Omron S8VS-18024BE.