+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8TS-03012F Power Supply

Omron S8TS-03012F SMPS is a 30 W switch mode power supply designed to provide 12 VDC with 2.5 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and a connector for panel installation and electrical connections. Typical efficiency is specified at 73% with both 100 VAC and 200 VAC input. A green output indicator provides operating status. The 12 VDC output and 2.5 A capacity define this configuration within the S8TS product family. Within the S8TS Series, the S8TS-03012F provides a DIN rail 30 W, 12 VDC configuration. Compare other 12V industrial power supplies from Omron industrial automation.

Omron S8TS-03012F Power Supply
BrandOmron
ProductPower Supply
Model NumberS8TS-03012F

Omron S8TS-03012F Power Supply - Technical Specifications

SpecificationValue
Power rating30 W
Output voltage12 VDC
Rated output current2.5 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionConnector
Efficiency73% typ. (at 100 VAC input) 73% typ. (at 200 VAC input)
Rated input voltage100 to 240 VAC
Rated input current0.7 A max. (at single operation, 100 VAC input) 0.4 A max. (at single operation, 200 VAC input)
Input Leakage current0.35 mA max. (at 100 VAC input) 0.7 mA max. (at 240 VAC input)
Input Frequency50/60Hz
Output indicatorYes (color: green)
Output voltage variable range±10% (With V.ADJ)
Start-up time1000 ms typ. (at 100 VAC input) 1000 ms typ. (at 200 VAC input)
Hold time20 ms min. (at 100 VAC input) 20 ms min. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-10 to 50 ?
Ambient temperature (Storage)-25 to 65 ?
Ambient humidity (OperatingStorage)25 to 85%
Cooling fanNo
Weight450 g max.

The Omron S8TS-03012F Power Supply provides 30 W rated power with a 12 VDC output and 2.5 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and a connector for panel installation. Typical efficiency is specified at 73% with both 100 VAC and 200 VAC input. These values define a 12 VDC configuration where connected equipment voltage, total current demand, source compatibility, DIN rail space, and connection arrangement should be considered together. The connected load should require 12 VDC and remain within the rated 2.5 A output. DIN rail space and connector access should therefore be checked before installation.

The incoming AC range describes source compatibility independently from the 12 VDC requirement of connected equipment. Comparing this model with a 24 VDC unit should begin with output-voltage compatibility rather than wattage or current alone. Models from different voltage classes show available product-family configurations rather than direct replacements. For a 60 W DIN rail model providing 24 VDC at 2.5 A, compare the Omron S8TS-06024.