+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8TS-06024 Power Supply

Omron S8TS-06024 SMPS is a 60 W switch mode power supply configured to provide 24 VDC with 2.5 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for structured panel installation. Typical efficiency is specified at 80% with both 100 VAC and 200 VAC input. A green output indicator provides operating status at the unit. The 24 VDC output and 2.5 A current rating distinguish this model from the lower-voltage S8TS configurations. Within the S8TS Series, the S8TS-06024 provides a DIN rail 60 W, 24 VDC configuration. Compare other 60W 24V power supplies from Omron control products.

Omron S8TS-06024 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8TS-06024

Omron S8TS-06024 Power Supply - Technical Specifications

SpecificationValue
Power rating60 W
Output voltage24 VDC
Rated output current2.5 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency80% typ. (at 100 VAC input) 80% typ. (at 200 VAC input)
Rated input voltage100 to 240 VAC
Rated input current1 A max. (at single operation, 100 VAC input) 0.5 A max. (at single operation, 200 VAC input)
Input Leakage current0.35 mA max. (at 100 VAC input) 0.7 mA max. (at 240 VAC input)
Input Frequency50/60Hz
Output indicatorYes (color: green)
Output voltage variable range22 to 28 V (With V.ADJ)
Start-up time1000 ms typ. (at 100 VAC input) 1000 ms typ. (at 200 VAC input)
Hold time20 ms min. (at 100 VAC input) 20 ms min. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 50 ?
Ambient temperature (Storage)-25 to 65 ?
Ambient humidity (OperatingStorage)25 to 85%
Cooling fanNo
Weight450 g max.

The Omron S8TS-06024 Power Supply provides 60 W rated power with a 24 VDC output and 2.5 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for panel installation. Typical efficiency is specified at 80% with both 100 VAC and 200 VAC input. These electrical values define a 24 VDC configuration where connected load voltage, current demand, incoming source compatibility, DIN rail space, and terminal access should be reviewed together. Connected equipment should require 24 VDC and keep combined current demand within the rated 2.5 A output. The available DIN rail area should therefore be confirmed before installation.

The incoming AC specification describes the source feeding the supply, while the 24 VDC rating describes compatibility with downstream loads. Comparing it with a 12 VDC model should focus first on output-voltage requirements because both models can have the same 2.5 A rated current while serving different load voltages. For a 30 W DIN rail model delivering 12 VDC at 2.5 A, compare the Omron S8TS-03012F.