Omron S8TS-06024F Power Supply
Omron S8TS-06024F SMPS is a 60 W switch mode power supply configured to provide 24 VDC with 2.5 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and a connector for installation and wiring inside control panels. Typical efficiency is specified at 80% with both 100 VAC and 200 VAC input. A green output indicator provides operating status directly at the unit. The 24 VDC output and 2.5 A rating define its electrical configuration within the S8TS family. Within the S8TS Series, the S8TS-06024F provides a DIN rail 60 W, 24 VDC configuration. Compare other DIN rail SMPS models from Omron automation equipment.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8TS-06024F |
Omron S8TS-06024F Power Supply - Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 60 W |
| Output voltage | 24 VDC |
| Rated output current | 2.5 A |
| Terminal type | Screw Terminal |
| Mounting method | DIN rail |
| Connection | Connector |
| Efficiency | 80% typ. (at 100 VAC input) 80% typ. (at 200 VAC input) |
| Rated input voltage | 100 to 240 VAC |
| Rated input current | 1 A max. (at single operation, 100 VAC input) 0.5 A max. (at single operation, 200 VAC input) |
| Input Leakage current | 0.35 mA max. (at 100 VAC input) 0.7 mA max. (at 240 VAC input) |
| Input Frequency | 50/60Hz |
| Output indicator | Yes (color: green) |
| Output voltage variable range | 22 to 28 V (With V.ADJ) |
| Start-up time | 1000 ms typ. (at 100 VAC input) 1000 ms typ. (at 200 VAC input) |
| Hold time | 20 ms min. (at 100 VAC input) 20 ms min. (at 200 VAC input) |
| Vibration resistance | 10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | -20 to 50 ? |
| Ambient temperature (Storage) | -25 to 65 ? |
| Ambient humidity (OperatingStorage) | 25 to 85% |
| Cooling fan | No |
| Weight | 450 g max. |
The Omron S8TS-06024F Power Supply provides 60 W rated power with a 24 VDC output and 2.5 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and a connector for installation and wiring. Typical efficiency is specified at 80% with both 100 VAC and 200 VAC input. The electrical ratings define a 24 VDC configuration where load voltage, total current demand, incoming source compatibility, rail space, and connector access should be evaluated together. Connected equipment should require 24 VDC and remain within the rated 2.5 A output.
The 100 to 240 VAC specification defines the permitted incoming source, while the 24 VDC output determines compatibility with downstream equipment. A lower-voltage S8TS model may use the same rated current but is not interchangeable with equipment requiring 24 VDC. Comparing related models should therefore begin with voltage and then consider power rating and connection arrangement. For a 30 W DIN rail model supplying 12 VDC at 2.5 A, compare the Omron S8TS-03012.


