+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G60012C Power Supply

Omron S8FS-G60012C SMPS is a 600 W switch mode power supply designed to provide 12 VDC for industrial control equipment requiring high output current. It delivers 50 A rated output current and accepts 100 to 240 VAC input at 50/60 Hz. Direct mounting supports fixed installation inside electrical panels, while screw terminals provide input and output wiring connections. Typical efficiency is specified at 84% with 100 VAC input and 88% with both 200 VAC and 230 VAC input. The 12 VDC output and 50 A capacity place this model among higher-capacity configurations in the series. Within the S8FS-G Series, the S8FS-G60012C provides a direct-mount 600 W, 12 VDC configuration. Compare other 600W 12V power supplies from Omron industrial automation.

Omron S8FS-G60012C Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G60012C

Omron S8FS-G60012C Power Supply - Technical Specifications

SpecificationValue
Power rating600 W
Output voltage12 VDC
Rated output current50 A
Terminal typeScrew Terminal
Mounting methodDirect Mounting
ConnectionTerminal blocks
Efficiency84 % typ.(at 100 VAC input) 88 % typ.(at 200 VAC input) 88 % typ.(at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current7.7 A typ.(at 100 VAC input) 3.8 A typ.(at 200 VAC input)
Input Leakage current0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Start-up time1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input)
Hold time30 ms typ.(at 100 VAC input) 30 ms typ.(at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ?
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanYes
Weight1050 g max.

The Omron S8FS-G60012C Power Supply provides 600 W rated power with a 12 VDC output and 50 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals and terminal blocks for fixed electrical-panel installation. Typical efficiency is specified at 84% with 100 VAC input and 88% with both 200 VAC and 230 VAC input. The combination of 12 VDC output and 50 A current capacity defines this model as a high-current configuration within its voltage class. Connected equipment should specifically require 12 VDC, and total load demand should remain within the rated 50 A output before panel mounting or source compatibility is evaluated. Direct mounting requires sufficient fixed panel area.

Screw terminals establish the electrical connection points for incoming AC and outgoing DC circuits, while the input range should be matched to the available source independently from the 12 VDC load requirement. Comparing models with the same 12 VDC output gives useful current-capacity context because voltage compatibility remains unchanged. A substantially lower-power direct-mount model can therefore illustrate the difference between small and high-current configurations. For a 50 W direct-mount 12 VDC supply rated at 4.3 A, compare the Omron S8FS-G05012C.