Omron S8FS-G60024C-500 Power Supply
Omron S8FS-G60024C-500 SMPS is a 600 W switch mode power supply designed to deliver 24 VDC with a rated output current of 27 A. It uses single-phase input, direct mounting, screw terminals, and terminal blocks for fixed panel installation. Rated input is 100 to 240 VAC, while allowable input extends from 85 to 264 VAC and 120 to 350 VDC. Typical efficiency is 85% at 100 VAC input, 89% at 200 VAC input, and 90% at 230 VAC input. The covered construction identifies the physical format of this version. Within the S8FS-G Series, the S8FS-G60024C-500 provides a direct-mount 600 W, 24 VDC configuration. Compare other 600W 24V power supplies from Omron automation products.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8FS-G60024C-500 |
Omron S8FS-G60024C-500 Power Supply – Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 600 W |
| Output voltage | 24 VDC |
| Rated output current | 27 A |
| Terminal type | Screw terminal |
| Phase | Single-phase |
| Mounting method | Direct mounting |
| Construction | Covered type |
| Connection | Terminal blocks |
| Efficiency | 85 % typ. (at 100 VAC input) 89 % typ. (at 200 VAC input) 90 % typ. (at 230 VAC input) |
| Rated input voltage | 100 to 240 VAC |
| Rated input current | 7.7 A typ. (at 100 VAC input) 3.8 A typ. (at 200 VAC input) |
| Input Leakage current | 0.5 mA max. (at 100 VAC input) 1 mA max. (at 200 VAC input) |
| Input Frequency | 50/60Hz (47 to 63 Hz) |
| Allowable input voltage variable range | 85 to 264 VAC (Single-phase) 120 to 350 VDC |
| Overvoltage protection | Yes, Shut off the input voltage and turn on the input again |
| Parallel operation | No (However, backup operation is possible, external diodes required.) |
| Output indicator | Yes (color: green) |
| Output voltage variable range | -10 to +15 % (With V.ADJ) |
| Hold time | 30 ms typ. (at 100 VAC input) 30 ms typ. (at 200 VAC input) |
| Vibration resistance | 10 to 55 Hz, 4.5 G max., 0.375 mm Single amplitude in each 3 directions for 2 hours |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | -20 to 70 ? |
| Ambient temperature (Storage) | -25 to 75 ? (with no freezing or condensation) |
| Ambient humidity (OperatingStorage) | 90 %RH max. |
| Cooling fan | Cooling fan Yes |
| Weight (Main) | 1050 g max. |
The Omron S8FS-G60024C-500 Power Supply provides 600 W rated power with a 24 VDC output and 27 A rated current. It uses single-phase input, direct mounting, screw terminals, terminal blocks, and a covered construction for fixed panel installation. Rated input is 100 to 240 VAC, while allowable input extends from 85 to 264 VAC and 120 to 350 VDC. Typical efficiency is specified at 85% with 100 VAC input, 89% with 200 VAC input, and 90% with 230 VAC input. These specifications establish the model within the 24 VDC class, where connected voltage and total load current should be checked before source or mounting requirements are considered. Connected equipment should remain within the stated 27 A output rating.
Direct mounting requires adequate fixed panel area, while screw terminals provide defined connection points for incoming and outgoing wiring. The allowable AC and DC input ranges describe source compatibility separately from the nominal 24 VDC load requirement. Comparing another direct-mount model with the same 24 VDC output gives useful capacity context because voltage remains constant while wattage and rated current differ. A substantially lower-power model can therefore show the available range within the same voltage class. For a 50 W direct-mount 24 VDC configuration supplying 2.2 A, compare the Omron S8FS-C05024J.


