+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G60024CD-500 Power Supply

Omron S8FS-G60024CD-500 SMPS is a 600 W switch mode power supply configured to provide 24 VDC with a rated output current of 27 A. It uses single-phase input, DIN track mounting, screw terminals, and terminal blocks for structured control-panel installation. Rated input is 100 to 240 VAC, while allowable input extends from 85 to 264 VAC and 120 to 350 VDC. Typical efficiency is specified at 85% with 100 VAC input, 89% with 200 VAC input, and 90% with 230 VAC input. The covered construction defines the physical configuration of this version. Within the S8FS-G Series, the S8FS-G60024CD-500 provides a DIN track 600 W, 24 VDC configuration. Compare other 600W SMPS models from Omron industrial automation.

Omron S8FS-G60024CD-500 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G60024CD-500

Omron S8FS-G60024CD-500 Power Supply – Technical Specifications

SpecificationValue
Power rating600 W
Output voltage24 VDC
Rated output current27 A
Terminal typeScrew terminal
PhaseSingle-phase
Mounting methodDIN track mounting
ConstructionCovered type
ConnectionTerminal blocks
Efficiency85 % typ. (at 100 VAC input) 89 % typ. (at 200 VAC input) 90 % typ. (at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current7.7 A typ. (at 100 VAC input) 3.8 A typ. (at 200 VAC input)
Input Leakage current0.5 mA max. (at 100 VAC input) 1 mA max. (at 200 VAC input)
Input Frequency50/60Hz (47 to 63 Hz)
Allowable input voltage variable range85 to 264 VAC (Single-phase) 120 to 350 VDC
Overvoltage protectionYes, Shut off the input voltage and turn on the input again
Parallel operationNo (However, backup operation is possible, external diodes required.)
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Hold time30 ms typ. (at 100 VAC input) 30 ms typ. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm Single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ? (with no freezing or condensation)
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanCooling fan Yes
Weight (Main)1050 g max.

The Omron S8FS-G60024CD-500 Power Supply provides 600 W rated power with a 24 VDC output and 27 A rated current. It uses single-phase input, DIN track mounting, screw terminals, terminal blocks, and a covered construction for structured cabinet installation. Rated input is 100 to 240 VAC, while allowable input ranges extend from 85 to 264 VAC and 120 to 350 VDC. Typical efficiency is specified at 85% with 100 VAC input, 89% with 200 VAC input, and 90% with 230 VAC input. These values establish the model as a high-capacity DIN track 24 VDC configuration where load voltage and current should be confirmed before source and installation conditions are assessed. Connected equipment should remain within the 27 A rating.

DIN track mounting requires sufficient rail space, while screw-terminal accessibility should be considered during conductor routing. The allowable AC and DC input ranges determine source compatibility independently from the nominal output requirement. Comparing another DIN track model with the same 24 VDC output provides useful capacity context because mounting and voltage remain consistent while wattage and current change. For a lower-capacity 100 W DIN track model that also provides 24 VDC but supplies 4.5 A, compare the Omron S8FS-G10024CD-500.