+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G60015CD Power Supply

Omron S8FS-G60015CD SMPS is a 600 W switch mode power supply designed to provide 15 VDC for industrial control equipment. It delivers 40 A rated output current and accepts 100 to 240 VAC input at 50/60 Hz. DIN rail mounting and screw terminals support structured installation and fixed electrical wiring inside control panels. Typical efficiency is specified at 84% with 100 VAC input and 88% with both 200 VAC and 230 VAC input. The 15 VDC output and 40 A current rating define this higher-capacity configuration. Within the S8FS-G Series, the S8FS-G60015CD provides a DIN rail 600 W, 15 VDC configuration. Compare other 600W industrial power supplies from Omron industrial automation.

Omron S8FS-G60015CD Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G60015CD

Omron S8FS-G60015CD Power Supply - Technical Specifications

SpecificationValue
Power rating600 W
Output voltage15 VDC
Rated output current40 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency84 % typ.(at 100 VAC input) 88 % typ.(at 200 VAC input) 88 % typ.(at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current7.7 A typ.(at 100 VAC input) 3.8 A typ.(at 200 VAC input)
Input Leakage current0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Start-up time1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input)
Hold time25 ms typ.(at 100 VAC input) 25 ms typ.(at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ?
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanYes
Weight1050 g max.

The Omron S8FS-G60015CD Power Supply provides 600 W rated power with a 15 VDC output and 40 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for structured electrical-panel installation. Typical efficiency is specified at 84% with 100 VAC input and 88% with both 200 VAC and 230 VAC input. These specifications position the model as a high-current 15 VDC supply where nominal voltage, current demand, incoming source, rail space, and wiring access should be evaluated together. The connected equipment should specifically require 15 VDC and keep combined current demand within the stated 40 A output capacity. DIN rail mounting requires sufficient rail space inside the cabinet.

Screw terminals provide fixed connection points for incoming AC and outgoing DC conductors, while the 100 to 240 VAC input range defines source-side compatibility independently from the 15 VDC load requirement. Comparing another model within the same mounting family can show how voltage and capacity differ across the product range, but nominal load voltage must always be checked first. A lower-power DIN rail configuration with another output voltage therefore represents a different electrical class rather than a direct substitute. For a 75 W DIN rail model delivering 12 VDC at 6.2 A, compare the Omron S8FS-C07512.