Omron S8FS-G60024C Power Supply
Omron S8FS-G60024C SMPS is a 600 W switch mode power supply configured to provide 24 VDC with a rated output current of 27 A. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals for fixed electrical-panel installation. Typical efficiency is specified at 85% with 100 VAC input, 89% with 200 VAC input, and 90% with 230 VAC input. The combination of 24 VDC output and 27 A capacity places this model among the higher-current configurations in the series. Within the S8FS-G Series, the S8FS-G60024C provides a direct-mount 600 W, 24 VDC configuration. Compare other 24V SMPS power supplies from Omron machine automation.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8FS-G60024C |
Omron S8FS-G60024C Power Supply - Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 600 W |
| Output voltage | 24 VDC |
| Rated output current | 27 A |
| Terminal type | Screw Terminal |
| Mounting method | Direct Mounting |
| Connection | Terminal blocks |
| Efficiency | 85 % typ.(at 100 VAC input) 89 % typ.(at 200 VAC input) 90 % typ.(at 230 VAC input) |
| Rated input voltage | 100 to 240 VAC |
| Rated input current | 7.7 A typ.(at 100 VAC input) 3.8 A typ.(at 200 VAC input) |
| Input Leakage current | 0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input) |
| Input Frequency | 50/60 Hz |
| Output indicator | Yes (color: green) |
| Output voltage variable range | -10 to +15 % (With V.ADJ) |
| Start-up time | 1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input) |
| Hold time | 30 ms typ.(at 100 VAC input) 30 ms typ.(at 200 VAC input) |
| Vibration resistance | 10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | -20 to 70 ? |
| Ambient temperature (Storage) | -25 to 75 ? |
| Ambient humidity (OperatingStorage) | 90 %RH max. |
| Cooling fan | Yes |
| Weight | 1050 g max. |
The Omron S8FS-G60024C Power Supply provides 600 W rated power with a 24 VDC output and 27 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals and terminal blocks for fixed panel installation. Typical efficiency is specified at 85% with 100 VAC input, 89% with 200 VAC input, and 90% with 230 VAC input. These electrical values establish the model as a high-current 24 VDC configuration where output voltage and current demand should be confirmed before physical installation requirements are considered. The connected equipment should operate from 24 VDC and keep total current demand within the stated 27 A capacity. Direct mounting requires adequate panel surface for installation.
Screw terminals establish the fixed wiring interface for source and load conductors, while the 100 to 240 VAC input range should be matched to the available source independently from the output requirement. Comparing models with the same nominal 24 VDC output provides the clearest capacity context because voltage compatibility remains unchanged while wattage and current can vary. A lower-capacity direct-mount supply can therefore show whether the full 600 W and 27 A rating is necessary. For a 150 W direct-mount 24 VDC model providing 6.5 A, compare the Omron S8FS-C15024.


