Omron S8FS-G30048C Power Supply
Omron S8FS-G30048C SMPS is a 300 W switch mode power supply configured to provide 48 VDC with a rated output current of 7 A. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals for fixed panel installation. Typical efficiency is specified at 82% with 100 VAC input and 87% with both 200 VAC and 230 VAC input. The 48 VDC output distinguishes this model from lower-voltage configurations within the same power class, while the 7 A rating defines its available current capacity. Within the S8FS-G Series, the S8FS-G30048C provides a direct-mount 300 W, 48 VDC configuration. Compare other 300W 48V power supplies from Omron machine control products.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8FS-G30048C |
Omron S8FS-G30048C Power Supply - Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 300 W |
| Output voltage | 48 VDC |
| Rated output current | 7 A |
| Terminal type | Screw Terminal |
| Mounting method | Direct Mounting |
| Connection | Terminal blocks |
| Efficiency | 82 % typ.(at 100 VAC input) 87 % typ.(at 200 VAC input) 87 % typ.(at 230 VAC input) |
| Rated input voltage | 100 to 240 VAC |
| Rated input current | 4.2 A typ.(at 100 VAC input) 2.1 A typ.(at 200 VAC input) |
| Input Leakage current | 0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input) |
| Input Frequency | 50/60 Hz |
| Output indicator | Yes (color: green) |
| Output voltage variable range | -10 to +15 % (With V.ADJ) |
| Start-up time | 1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input) |
| Hold time | 30 ms typ.(at 100 VAC input) 30 ms typ.(at 200 VAC input) |
| Vibration resistance | 10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | -20 to 70 ? |
| Ambient temperature (Storage) | -25 to 75 ? |
| Ambient humidity (OperatingStorage) | 90 %RH max. |
| Cooling fan | Yes |
| Weight | 700 g max. |
The Omron S8FS-G30048C Power Supply provides 300 W rated power with a 48 VDC output and 7 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals and terminal blocks for fixed panel installation. Typical efficiency is specified at 82% with 100 VAC input and 87% with both 200 VAC and 230 VAC input. These specifications establish the model within the 48 VDC class, where nominal load voltage should be confirmed before available current, incoming source, or mounting arrangement is evaluated. The connected equipment should operate from 48 VDC and keep its total current demand within the stated 7 A output rating. Direct mounting requires adequate fixed panel space.
Screw terminals provide the electrical interface for incoming AC and outgoing DC conductors, while the 100 to 240 VAC input range determines source-side compatibility independently from the 48 VDC requirement. Models with a different nominal output voltage should not be considered direct alternatives based only on wattage or current. They instead represent different load requirements within the product family. For comparison with a 35 W DIN rail configuration that supplies 15 VDC at 2.4 A, compare the Omron S8FS-C03515D.


