+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G30024CD-500 Power Supply

Omron S8FS-G30024CD-500 SMPS is a 300 W switch mode power supply configured to provide 24 VDC with a rated output current of 14 A. It uses single-phase input, DIN track mounting, screw terminals, and terminal blocks for structured electrical-panel installation. Rated input is 100 to 240 VAC, while allowable input extends from 85 to 264 VAC and 80 to 370 VDC. Typical efficiency is 82% at 100 VAC input and 87% at both 200 VAC and 230 VAC input. The covered construction identifies the physical format of this version. Within the S8FS-G Series, the S8FS-G30024CD-500 provides a DIN track 300 W, 24 VDC configuration. Compare other 24V industrial SMPS models from Omron automation products.

Omron S8FS-G30024CD-500 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G30024CD-500

Omron S8FS-G30024CD-500 Power Supply – Technical Specifications

SpecificationValue
Power rating300 W
Output voltage24 VDC
Rated output current14 A
Terminal typeScrew terminal
PhaseSingle-phase
Mounting methodDIN track mounting
ConstructionCovered type
ConnectionTerminal blocks
Efficiency82 % typ. (at 100 VAC input) 87 % typ. (at 200 VAC input) 87 % typ. (at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current4.2 A typ. (at 100 VAC input) 2.1 A typ. (at 200 VAC input)
Input Leakage current0.5 mA max. (at 100 VAC input) 1 mA max. (at 200 VAC input)
Input Frequency50/60Hz (47 to 63 Hz)
Allowable input voltage variable range85 to 264 VAC (Single-phase) 80 to 370 VDC
Overvoltage protectionYes, Shut off the input voltage and turn on the input again
Parallel operationNo (However, backup operation is possible, external diodes required.)
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Hold time30 ms typ. (at 100 VAC input) 30 ms typ. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm Single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ? (with no freezing or condensation)
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanCooling fan Yes
Weight (Main)700 g max.

The Omron S8FS-G30024CD-500 Power Supply provides 300 W rated power with a 24 VDC output and 14 A rated current. It uses single-phase input, DIN track mounting, screw terminals, terminal blocks, and a covered construction for structured cabinet installation. Rated input is 100 to 240 VAC, while allowable input ranges extend from 85 to 264 VAC and 80 to 370 VDC. Typical efficiency is specified at 82% with 100 VAC input and 87% with both 200 VAC and 230 VAC input. These values establish the model as a DIN track 24 VDC configuration where load voltage and current should be confirmed before incoming source and mounting conditions are evaluated. Connected equipment should remain within the 14 A rated output.

DIN track mounting requires adequate rail space inside the enclosure, while screw-terminal accessibility should be considered when arranging conductors. The allowable AC and DC input ranges describe source compatibility separately from the nominal 24 VDC requirement on the load side. Comparing another 24 VDC supply maintains the electrical relationship and makes differences in power rating, current capacity, and mounting easier to assess. For a lower-capacity direct-mount 24 VDC configuration rated at 75 W with 3.2 A output current, compare the Omron S8FS-C07524J.