+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-C07524J Power Supply

Omron S8FS-C07524J SMPS is a 75 W switch mode power supply designed to provide 24 VDC for industrial control equipment. It delivers 3.2 A rated output current and uses single-phase input, direct mounting, and screw terminals for fixed panel installation. The metal-frame unit has a stated efficiency of 87% and supports 100 to 240 VAC rated input, with allowable ranges of 85 to 264 VAC and 120 to 370 VDC. Its dimensions are 38 mm wide, 97 mm high, and 159 mm deep, with the terminal block facing upward. Within the S8FS-C Series, the S8FS-C07524J provides a direct-mount 75 W, 24 VDC configuration. Compare other 75W SMPS models from Omron automation products.

Omron S8FS-C07524J Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-C07524J

Omron S8FS-C07524J Power Supply – Technical Specifications

SpecificationValue
Power rating75W
Output voltage24V
Rated output current3.2A
Terminal typeScrew
PhaseSingle
Number of output branches1
Allowable supply voltage DC120-370 V
Mounting methodDirect mounting
TypeMetal frame
Efficiency87%
Temperature range-20-60?
Rated supply voltage at AC 50 Hz100-240V
Height38mm
Width97mm
Depth159mm
FeaturesTerminal block facing upward
Allowable supply voltage AC85-264 V

The Omron S8FS-C07524J Power Supply provides 75 W rated power with a 24 VDC output and 3.2 A rated current for industrial control equipment. It uses single-phase input, direct mounting, and screw terminals for fixed panel installation. Rated supply voltage is 100 to 240 VAC, while allowable input ranges extend from 85 to 264 VAC and 120 to 370 VDC. The metal-frame unit has a stated efficiency of 87%. Its dimensions are 38 mm wide, 97 mm high, and 159 mm deep, with the terminal block facing upward. These electrical and dimensional characteristics define how the unit fits into control panels where load current, available mounting surface, enclosure depth, and wiring access must be considered together.

The connected equipment should require 24 VDC and remain within the 3.2 A rated current. Direct mounting differentiates this model from DIN rail variants and should be checked against the available panel arrangement. The allowable AC and DC input ranges define the supported incoming supply conditions. Its 159 mm depth should be considered when selecting the enclosure, while the upward-facing terminal block requires sufficient wiring clearance. When comparing models, voltage compatibility should be considered before current capacity and rated power. For a higher-capacity direct-mount 24 VDC model rated at 350 W with 14.6 A output, see Omron S8FS-C35024.