+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-C10015D Power Supply

Omron S8FS-C10015D SMPS is a 100 W switch mode power supply configured to provide 15 VDC for industrial control equipment. It delivers 7 A rated output current and operates from single-phase 85 to 132 VAC, 176 to 264 VAC, or 248 to 373 VDC input at 50/60 Hz. DIN rail mounting supports structured panel installation, while screw terminals provide fixed electrical connections. Typical efficiency is specified at 83% with 115 VAC input and 84% with 230 VAC input. A green indicator provides output status during operation. Within the S8FS-C Series, the S8FS-C10015D provides a DIN rail 100 W, 15 VDC configuration. Compare other 100W SMPS models from Omron automation products.

Omron S8FS-C10015D Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-C10015D

Omron S8FS-C10015D Power Supply - Technical Specifications

SpecificationValue
Power rating100 W
Output voltage15 VDC
Rated output current7 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency83 % typ.(at 115 VAC input) 84 % typ.(at 230 VAC input)
Rated input voltageSingle phase 85 to 132 VAC, 176 to 264 VAC, 248 to 373 VDC
Rated input current2 A typ.(at 115 VAC input) 1.1 A typ.(at 230 VAC input)
Input Leakage current0.35 A typ.(at 115 VAC input) 0.60 A typ.(at 230 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10% to 10% (with V. ADJ)
Start-up time440 ms max.(at 115 VAC input) 720 ms max.(at 230 VAC input)
Hold time36 ms max.(at 115 VAC input) 39 ms max.(at 230 VAC input)
Vibration resistance10 to 55 Hz, 0.375-mm half amplitude for 2 h each in X, Y, and Z directions 10 to 500 Hz, 0.26-mm half amplitude for 1 h each in X, Y, and Z directions
Shock resistance150 m/s2, 3 times each in ±X, ±Y, ±Z directions
Ambient temperature (Operating)-20 to 60°C
Ambient temperature (Storage)-40 to 85°C
Ambient humidity (OperatingStorage)20% to 90% (Storage humidity: 10% to 95%)
Cooling fanNo
Weight400 g max.

The Omron S8FS-C10015D Power Supply provides 100 W rated power with a 15 VDC output and 7 A rated current for industrial control equipment. It accepts single-phase 85 to 132 VAC, 176 to 264 VAC, or 248 to 373 VDC input at 50/60 Hz. DIN rail mounting supports structured installation inside electrical panels, while screw terminals provide fixed input and output wiring. Typical efficiency is specified at 83% with 115 VAC input and 84% with 230 VAC input. Typical input current is 2 A at 115 VAC and 1.1 A at 230 VAC. A green indicator provides output status. Start-up time is specified at 440 ms maximum with 115 VAC input and 720 ms maximum with 230 VAC input.

Operating temperature extends from -20°C to 60°C, while storage temperature ranges from -40°C to 85°C. Operating humidity is specified from 20% to 90%. Vibration resistance covers 10 to 55 Hz and 10 to 500 Hz under the stated test conditions, while shock resistance is rated at 150 m/s². Selection should confirm that the connected load requires 15 VDC and remains within the 7 A output rating. The available input supply, DIN rail arrangement, screw-terminal access, and operating conditions should then be checked against the panel requirements. For a lower-power 15 VDC DIN rail configuration rated at 35 W with 2.4 A output, see Omron S8FS-C03515.