+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-C10024 Power Supply

Omron S8FS-C10024 SMPS is a 100 W switch mode power supply designed to provide 24 VDC for industrial control equipment. It delivers 4.5 A rated output current and uses single-phase input, direct mounting, and screw terminals for fixed panel installation. The metal-frame unit has a stated efficiency of 87% and supports 100 to 240 VAC rated input, with allowable ranges of 85 to 264 VAC and 248 to 373 VDC. Its dimensions are 38 mm wide, 97 mm high, and 159 mm deep, with the terminal block facing upward. Within the S8FS-C Series, the S8FS-C10024 provides a direct-mount 100 W, 24 VDC configuration. Compare other 24V SMPS power supplies from Omron industrial automation products.

Omron S8FS-C10024 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-C10024

Omron S8FS-C10024 Power Supply – Technical Specifications

SpecificationValue
Power rating100W
Output voltage24V
Rated output current4.5A
Terminal typeScrew
PhaseSingle
Number of output branches1
Allowable supply voltage DC248-373 V
Mounting methodDirect mounting
TypeMetal frame
Efficiency87%
Temperature range-20-60?
Rated supply voltage at AC 50 Hz100-240V
Height38mm
Width97mm
Depth159mm
FeaturesTerminal block facing upward
Allowable supply voltage AC85-264V

The Omron S8FS-C10024 Power Supply provides 100 W rated power with a 24 VDC output and 4.5 A rated current for industrial control equipment. It uses single-phase input, direct mounting, and screw terminals for fixed panel installation. Rated supply voltage is 100 to 240 VAC, while allowable ranges extend from 85 to 264 VAC and 248 to 373 VDC. The metal-frame unit has a stated efficiency of 87%. Its enclosure measures 38 mm wide, 97 mm high, and 159 mm deep, with the terminal block facing upward. These specifications allow the unit to be evaluated according to 24 VDC load requirements, current capacity, mounting surface, cabinet depth, incoming supply, and the space required for terminal wiring.

The connected equipment should require 24 VDC and remain within the 4.5 A rated output. Direct mounting allows the power supply to be fixed directly to the panel and should be checked against the available mechanical layout. The allowable AC and DC input ranges define supported incoming supply conditions, while the upward-facing terminal block requires sufficient conductor clearance. Its 159 mm depth should also be considered when choosing the enclosure. When comparing 24 VDC units, current requirement, power capacity, mounting method, and physical dimensions provide the main differences after voltage compatibility is confirmed. For a lower-power direct-mount 24 VDC configuration rated at 75 W with 3.2 A output, see Omron S8FS-C07524J.