+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G15005CD Power Supply

Omron S8FS-G15005CD SMPS is a 150 W switch mode power supply designed to provide 5 VDC with a rated output current of 21 A. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals for structured electrical-panel installation. Typical efficiency is 78% with 100 VAC input and 81% with both 200 VAC and 230 VAC input. The DIN rail arrangement combines a low-voltage, high-current electrical specification with organized cabinet installation. This makes output voltage, current requirement, rail space, and wiring access important selection factors. Within the S8FS-G Series, the S8FS-G15005CD provides a DIN rail 150 W, 5 VDC configuration. Compare other 5V industrial power supplies from Omron automation solutions.

Omron S8FS-G15005CD Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G15005CD

Omron S8FS-G15005CD Power Supply - Technical Specifications

SpecificationValue
Power rating150 W
Output voltage5 VDC
Rated output current21 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency78 % typ.(at 100 VAC input) 81 % typ.(at 200 VAC input) 81 % typ.(at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current3 A typ.(at 100 VAC input) 1.8 A typ.(at 200 VAC input)
Input Leakage current0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Start-up time1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input)
Hold time14 ms typ.(at 100 VAC input) 80 ms typ.(at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ?
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanNo
Weight500 g max.

The Omron S8FS-G15005CD Power Supply provides 150 W rated power with a 5 VDC output and 21 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals for structured electrical-panel installation. Typical efficiency is 78% with 100 VAC input and 81% with both 200 VAC and 230 VAC input. These specifications position the model as a low-voltage, high-current DIN rail supply where 5 VDC load compatibility should be confirmed before current capacity, rail space, or source voltage is considered. The connected equipment should remain within the 21 A rated output and operate from the specified nominal voltage.

DIN rail mounting requires available rail length, while screw-terminal access should be considered during panel wiring. Incoming AC voltage and outgoing DC requirements describe separate electrical conditions, so both should be checked independently. A comparison within the same 5 VDC class gives stronger capacity context because nominal voltage remains unchanged while power and current vary. For a substantially lower-capacity DIN rail model that also provides 5 VDC but is rated at 25 W with 5 A output current, compare the Omron S8FS-C02505D.