+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G15012C Power Supply

Omron S8FS-G15012C SMPS is a 150 W switch mode power supply designed to provide 12 VDC for industrial control equipment. It delivers 13 A rated output current and accepts 100 to 240 VAC input at 50/60 Hz. Direct mounting supports fixed panel installation, while screw terminals provide input and output wiring connections. Typical efficiency is specified at 84% with 100 VAC input and 87% with both 200 VAC and 230 VAC input. The combination of 12 VDC output and 13 A current capacity positions this model for higher-current loads within its voltage class. Within the S8FS-G Series, the S8FS-G15012C provides a direct-mount 150 W, 12 VDC configuration. Compare other 150W 12V SMPS models from Omron industrial controls.

Omron S8FS-G15012C Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G15012C

Omron S8FS-G15012C Power Supply - Technical Specifications

SpecificationValue
Power rating150 W
Output voltage12 VDC
Rated output current13 A
Terminal typeScrew Terminal
Mounting methodDirect Mounting
ConnectionTerminal blocks
Efficiency84 % typ.(at 100 VAC input) 87 % typ.(at 200 VAC input) 87 % typ.(at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current3 A typ.(at 100 VAC input) 1.8 A typ.(at 200 VAC input)
Input Leakage current0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Start-up time1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input)
Hold time10 ms typ.(at 100 VAC input) 55 ms typ.(at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ?
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanNo
Weight500 g max.

The Omron S8FS-G15012C Power Supply provides 150 W rated power with a 12 VDC output and 13 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals for fixed panel installation. Typical efficiency is specified at 84% with 100 VAC input and 87% with both 200 VAC and 230 VAC input. These values define a higher-current 12 VDC configuration where connected load voltage and current demand form the primary electrical selection criteria. The equipment supplied by this model should specifically operate from 12 VDC, and total current demand should remain within the 13 A rating before installation requirements are considered.

Direct mounting requires adequate panel surface, while screw terminals define the fixed wiring method for incoming AC and outgoing DC connections. The input range should be matched to the available source independently from the load-side 12 VDC requirement. When comparing another model with a different output voltage, that voltage difference determines whether it can serve the same equipment. Wattage alone is not sufficient for substitution. For comparison with a higher-power DIN rail configuration delivering 48 VDC at 7 A from a 300 W rating, compare the Omron S8FS-G30048CD.