+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G15015C Power Supply

Omron S8FS-G15015C SMPS is a 150 W switch mode power supply configured to provide 15 VDC with a rated output current of 10 A. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals for fixed panel installation. Typical efficiency is specified at 85% with 100 VAC input and 88% with both 200 VAC and 230 VAC input. The 15 VDC output distinguishes this model from 5 VDC, 12 VDC, and 24 VDC configurations in the same product family, while the 10 A rating defines its available current capacity. Within the S8FS-G Series, the S8FS-G15015C provides a direct-mount 150 W, 15 VDC configuration. Compare other 150W industrial power supplies from Omron automation.

Omron S8FS-G15015C Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G15015C

Omron S8FS-G15015C Power Supply - Technical Specifications

SpecificationValue
Power rating150 W
Output voltage15 VDC
Rated output current10 A
Terminal typeScrew Terminal
Mounting methodDirect Mounting
ConnectionTerminal blocks
Efficiency85 % typ.(at 100 VAC input) 88 % typ.(at 200 VAC input) 88 % typ.(at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current3 A typ.(at 100 VAC input) 1.8 A typ.(at 200 VAC input)
Input Leakage current0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Start-up time1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input)
Hold time10 ms typ.(at 100 VAC input) 55 ms typ.(at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ?
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanNo
Weight500 g max.

The Omron S8FS-G15015C Power Supply provides 150 W rated power with a 15 VDC output and 10 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals for fixed panel installation. Typical efficiency is specified at 85% with 100 VAC input and 88% with both 200 VAC and 230 VAC input. These electrical values position the model in the 15 VDC class, where voltage compatibility should be confirmed before available current, input supply, or mounting format is evaluated. The connected equipment should operate from 15 VDC and keep its combined current demand within the stated 10 A rating.

Direct mounting requires an appropriate fixed panel surface, while screw terminals provide the input and output connection method. The 100 to 240 VAC input range determines which incoming source can feed the power supply without changing its nominal 15 VDC output class. Comparing another 15 VDC model allows current and wattage differences to be interpreted without changing the load voltage requirement. For a lower-capacity DIN rail configuration that provides 15 VDC at 2.1 A from a 25 W power rating, compare the Omron S8FS-C02512J.