+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G10024CE Power Supply

Omron S8FS-G10024CE SMPS is a 100 W switch mode power supply configured to deliver 24 VDC with a rated output current of 4.5 A. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with a connector interface for fixed panel installation. Typical efficiency is specified at 87% with 100 VAC input and 89% with both 200 VAC and 230 VAC input. The 24 VDC output and direct-mount format position this model for control-panel applications where the connected load requires this voltage and current capacity. Within the S8FS-G Series, the S8FS-G10024CE provides a direct-mount 100 W, 24 VDC configuration. Compare other 24V industrial SMPS models from Omron machine automation.

Omron S8FS-G10024CE Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G10024CE

Omron S8FS-G10024CE Power Supply - Technical Specifications

SpecificationValue
Power rating100 W
Output voltage24 VDC
Rated output current4.5 A
Terminal typeScrew Terminal
Mounting methodDirect Mounting
ConnectionConnector
Efficiency87 % typ.(at 100 VAC input) 89 % typ.(at 200 VAC input) 89 % typ.(at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current2.1 A typ.(at 100 VAC input) 1.2 A typ.(at 200 VAC input)
Input Leakage current0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Start-up time1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input)
Hold time10 ms typ.(at 100 VAC input) 55 ms typ.(at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ?
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanNo
Weight400 g max.

The Omron S8FS-G10024CE Power Supply provides 100 W rated power with a 24 VDC output and 4.5 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with a connector interface for fixed panel installation. Typical efficiency is 87% with 100 VAC input and 89% with both 200 VAC and 230 VAC input. These specifications establish the model as a direct-mount 24 VDC supply where output voltage, current capacity, incoming source, panel surface, and connection type should be evaluated together. The connected equipment should specifically operate from 24 VDC, and its combined current demand should remain within the stated 4.5 A output capacity.

Direct mounting requires an appropriate panel surface rather than DIN rail space, while connector compatibility should be confirmed as part of the electrical installation. Input voltage describes the source side of the power supply and should not be confused with the 24 VDC requirement on the load side. When a model with a different output voltage is considered, that voltage difference becomes more important than the wattage value because it changes the connected load requirement. For comparison with a higher-capacity DIN rail model delivering 12 VDC at 25 A from a 300 W rating, compare the Omron S8FS-G30012CD.