Omron S8FS-G15005C Power Supply
Omron S8FS-G15005C SMPS is a 150 W switch mode power supply configured to provide 5 VDC for industrial control equipment requiring higher current at low voltage. It delivers 21 A rated output current and accepts 100 to 240 VAC input at 50/60 Hz. Direct mounting supports fixed installation inside electrical panels, while screw terminals provide defined input and output wiring connections. Typical efficiency is specified at 78% with 100 VAC input and 81% with both 200 VAC and 230 VAC input. The 5 VDC output and 21 A capacity distinguish this model within the 150 W range. Within the S8FS-G Series, the S8FS-G15005C provides a direct-mount 150 W, 5 VDC configuration. Compare other 150W 5V power supplies from Omron control equipment.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8FS-G15005C |
Omron S8FS-G15005C Power Supply - Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 150 W |
| Output voltage | 5 VDC |
| Rated output current | 21 A |
| Terminal type | Screw Terminal |
| Mounting method | Direct Mounting |
| Connection | Terminal blocks |
| Efficiency | 78 % typ.(at 100 VAC input) 81 % typ.(at 200 VAC input) 81 % typ.(at 230 VAC input) |
| Rated input voltage | 100 to 240 VAC |
| Rated input current | 3 A typ.(at 100 VAC input) 1.8 A typ.(at 200 VAC input) |
| Input Leakage current | 0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input) |
| Input Frequency | 50/60 Hz |
| Output indicator | Yes (color: green) |
| Output voltage variable range | -10 to +15 % (With V.ADJ) |
| Start-up time | 1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input) |
| Hold time | 14 ms typ.(at 100 VAC input) 80 ms typ.(at 200 VAC input) |
| Vibration resistance | 10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | -20 to 70 ? |
| Ambient temperature (Storage) | -25 to 75 ? |
| Ambient humidity (OperatingStorage) | 90 %RH max. |
| Cooling fan | No |
| Weight | 500 g max. |
The Omron S8FS-G15005C Power Supply provides 150 W rated power with a 5 VDC output and 21 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals for fixed panel installation. Typical efficiency is specified at 78% with 100 VAC input and 81% with both 200 VAC and 230 VAC input. The combination of low output voltage and higher current defines this model as a 5 VDC configuration where current demand should be evaluated carefully. The connected equipment must specifically require 5 VDC, and its combined load current should stay within the 21 A rating before mounting or incoming supply considerations are evaluated.
Direct mounting requires suitable panel area, while screw terminals provide the fixed connection points for input and output wiring. The 100 to 240 VAC input range determines source compatibility independently from the 5 VDC load requirement. Comparing models with different nominal voltages should focus first on voltage compatibility because identical or similar wattage does not make those models electrically interchangeable. A model with the same 150 W power rating but a much higher 48 VDC output therefore serves a different load class. For a direct-mount 150 W configuration delivering 48 VDC at 3.3 A, compare the Omron S8FS-G15048C.


