Omron OS32C-CBBP Safety Laser Scanner
Omron OS32C-CBBP is an I/O block for OS32C safety laser scanners with rear cable access, designed for installations where power, safety I/O, and communication wiring are routed behind the scanner. Rear-entry wiring can simplify integration on machine frames, guarded areas, and equipment with sufficient clearance behind the unit. Compatible OS32C scanners support a 270° detection field, 0.4° angular resolution, Type 3 classification, PLd/Safety Category 3 performance, and dual PNP OSSD safety outputs. The I/O block provides the connection layout; the scanner determines the protective range and sensing performance. The OS32C-CBBP belongs to the OS32C Series within the safety scanner component range from Omron machine safety components.
| Brand | Omron |
| Product | Safety Laser Scanner |
| Model Number | OS32C-CBBP |
Omron OS32C-CBBP Safety Laser Scanner - Technical Specifications
| Specification | Value |
|---|---|
| Max. Operating Range / Description | I/O block,With cable access from the back |
| Sensor Type | Type 3 Safety Laser Scanner |
| Performance Level (PL)/ Safety Category | PLd/Safety Category 3 |
| Detection Capability | Configurable via the configuration tool; Non-transparent with a diameter of 30, 40, 50, 70mm (1.8% reflectivity or greater) (default: 70 mm) |
| Monitoring Zone | Monitoring Zone Set Count: (Safety Zone + 2 Warning Zones) x 70 sets |
| Operating Range | Safety Zone: 1.75 m (min. obj. resolution of 30 mm) 2.5 m (min. obj. resolution of 40 mm) 3.0 m (min. obj. resolution of 50 mm or 70 mm) Warning Zone: 10.0 m |
| Maximum Measurement Error | 100 mm (at range of 3 m or less); 110 mm (at distance greater than 3 m and up to 4m) |
| Detection Angle | 270° |
| Angular Resolution | 0.4° |
| Laser Beam Diameter | 6 mm at optics cover, 14 mm (typical) at 3 m. |
| Laser Scan Plane Height | 67mm from the bottom of the scanner |
| Response Time | Response time from ON to OFF: From 80 ms (2 scans) to 680 ms (up to 17 scans) *8 Response time from OFF to ON: Response time from ON to OFF + 100 ms to 60 s (Configurable) |
| Power Consumption | Normal operation: 5 W max; Standby mode: 3.75 W (without output load) |
| Safety Output (OSSD) | PNP transistor x 2, load current of 250 mA max., residual voltage of 2 V max.; load capacity of 2.2 µF max., leak current of 1 mA max. |
| Auxiliary Output (Non-Safety) | NPN/PNP transistor x 1, load current of 100 mA max., residual voltage of 2 V max., leak current of 1 mA max. |
| Warning Output (Non-Safety) | NPN/PNP transistor x 1, load current of 100 mA max., residual voltage of 2 V max., leak current of 1 mA max. |
| Connection Type | Power Cable: 18-pin mini-connector (pigtail) Communication Cable: M12, 4-pin connector |
| Ambient Temperature | Operation: -10 to 50 °C, Storage: -25 to 70 °C |
| Ambient Humidity | Operation & Storage: 95% RH max., non-condensing |
| Insulation Resistance | 20 MΩ or higher (500 VDC) |
| Enclosure Rating | IP65 |
| Dimensions (WxHxD) | 133.0 x 104.5 x 142.7 mm (except cable) |
| Power Cable | Up to 30 m |
| Weight (Main Unit only) | 1.3 kg |
The Omron OS32C-CBBP Safety Laser Scanner I/O Block is designed for compatible OS32C installations that require cable access from the back of the scanner assembly. Rear-entry wiring can simplify installation where the scanner is mounted on a machine frame, panel, or guarded structure with suitable space behind the unit. The connected OS32C platform can support a 270° detection field, 0.4° angular resolution, Type 3 classification, PLd/Safety Category 3 performance, and dual PNP OSSD safety outputs. The I/O block provides the connection arrangement, while the connected sensor and scanner configuration determine the actual protective range, object resolution, and monitoring-zone behavior.
OS32C-CBBP is therefore selected mainly by cable-entry direction, scanner compatibility, wiring access, and service requirements. The rear connection layout can keep side areas clear for nearby machine components and can make cable routing more direct in suitable installations. The OS32C system uses an 18-pin power connection together with an M12 communication interface, so the I/O block forms part of the overall electrical and communication layout. It does not independently change scanner response time, detection capability, or safety-zone distance. For installations where cable access from the side is more convenient than rear entry, see the OS32C-CBSP1 I/O block with left-side cable access.
