Home / Products / Fork Sensors / Leuze / Label Gap Sensor / GSU14E-16T.3-M12V
Leuze Ultrasonic Fork Sensor
GSU14E/16T.3-M12V
Leuze GSU14E/16T.3-M12V Technical Features
The Leuze GSU14E/16T.3-M12V is an ultrasonic fork sensor with part number 50142878. It belongs to the GS 14 series and has a label identification fork type. The label width is 4mm and the label gap of 2mm. The sensor uses an M12 connector and requires a supply voltage of 18 to 30 VDC. It supports various output modes, including IO-Link / NPN light switching (switching in the gap), PNP dark switching (switching on the label), PNP light switching (switching in the gap), and NPN dark switching (switching on the label).
| Series | 14 |
| Principle of Physics | Ultrasonics |
| Application | Detection of non-transparent labels Detection of transparent labels |
| Label width, min. | 4 mm |
| Label gap, min. | 2 mm |
| Medium | Transparent and not transparent |
| Special version | Manual fine-tuning of the switching threshold Teach input |
| Supply voltage UB | 18 … 30 V, DC |
| Open-circuit current | 0 … 60 mA, Typical value |
| Number of teach inputs | 1 Piece(s) |
| Type | Teach input |
| Voltage type | DC |
| Switching voltage | high: ≥9V low: ≤ 2 V |
| Input resistance | 15,000 Ω |
| Active switching state | High |
| Number of digital switching outputs | 2 Piece(s) |
| Type | Digital switching output |
| Voltage type | DC |
| Switching current, max. | 100 mA |
| Switching voltage | high: ≥(UB-2V) low: ≤ 2 V |
| Load Capacity | 0.01 µF |
| Switching element | Transistor, Push-pull |
| Switching(Output 1) principle | IO-Link / NPN light switching (switching in the gap), PNP dark switching (switching on the label) |
| Switching(Output 2) principle | PNP light switching (switching in the gap), NPN dark switching (switching on the label) |
| Switching frequency | 2,000 Hz |
| Response time | 0.2 ms |
| Readiness delay | 300 ms |
| Max. Bandgeschwindigkeit beim Teach-In | 50 m/min |
| Type | IO-Link |
| COM mode | COM3 |
| Profile | Smart sensor profile |
| Min. cycle time | COM3 = 0.5 ms |
| Frame type | 2.5 |
| Specification | V1.1 |
| Device ID | 2521 |
| SIO-mode support | Yes |
| Number of connections | 1 Piece(s) |
| Function | Signal IN Signal OUT Voltage supply |
| Type of connection | Connector |
| Thread size | M12 |
| Type | Male |
| Material | Metal |
| No. of pins | 5 -pin |
| Encoding | A-coded |
| Plug outlet | Vertical (perpendicular to belt movement) |
| Design | Fork |
| Mouth width | 4 mm |
| Mouth depth | 80 mm |
| Dimension (W x H x L) | 22 mm x 46.9 mm x 96 mm |
| Housing material | Metal |
| Metal housing | Diecast zinc, galvanic nickel coating |
| Net weight | 270 g |
| Housing color | Silver |
| Type of fastening | Mounting thread Through-hole mounting |
| Type of display | LED |
| Number of LEDs | 3 Piece(s) |
| Operational controls | Control buttons |
| The function of the operational control | Dynamic teach on label carrier and label |
Product Documentation: GSU14E/16T.3-M12V
Related Products: GSU14E/16T.3-M12V
GK 14/24 L.2 – 50031714
Leuze Label Gap Sensor, Model No: GK 14/24 L.2, Part Number: 50031714, Series: Fork type GK 14, Principle of physics: Capacitive Fork Sensor, Label width: 10 mm, Label gap: 2 mm, Supply voltage: 10 to 30 VDC, Light source: Infrared LED, Connection: Connector type, Thread size: M12, Number of pins: 5-pin.
GSX14E/1WT.3-M12V – 50142868
Label Gap Sensor, Model No: GSX14E/1WT.3-M12V, Part Number: 50142868, Series: Fork type GS 14, Principle of physics: Optical and Ultrasonic Sensor, Label width: 4 mm Ultrasonics / 2 mm Optical, Label gap: 2 mm, Light source: Infrared LED, Supply voltage: 18 to 30 VDC, Connection: Connector type, Thread size: M12, Number of pins: 5-pin.
IGSU14E/1WT.3-M12 – 50142872
Label Sensor, Model No: IGSU14E/1WT.3-M12, Part Number: 50142872, Series: Fork type GS 14, Principle of physics: Ultrasonic Fork Sensor, Label width: 4 mm, Label gap: 2 mm, Supply voltage: 18 to 30 VDC, Connection: Connector type, Thread size: M12, Number of pins: 5-pin.
GS 63B/6D.3-S8V – 50128009
Label Gap Sensor, Model No: GS 63B/6D.3-S8V, Part Number: 50128009, Series: Fork type GS 63, Principle of physics: Optical Sensor, Label width: 2 mm, Label gap: 2 mm, Light source: Infrared LED, Supply voltage: 10 to 30 VDC, Connection: Connector type, Thread size: M8, Number of pins: 4-pin.
GSU14E/LGT.3-M12 – 50142875
Leuze Label Gap Sensor, Model No: GSU14E/LGT.3-M12, Part Number: 50142875, Series: Fork type GS 14, Principle of physics: Ultrasonic Fork Sensor, Label width: 4 mm, Label gap: 2 mm, Supply voltage: 18 to 30 VDC, Connection: Connector type, Thread size: M12, Number of pins: 5-pin.
GS 63B/6 – 50128001
Label Gap Sensor, Model No: GS 63B/6, Part Number: 50128001, Series: Fork type GS 63, Principle of physics: Optical Sensor, Label width: 2 mm, Label gap: 2 mm, Light source: Infrared LED, Supply voltage: 10 to 30 VDC, Connection: Cable type, Cable length: 2000 mm, Thread size: M12, Number of conductors: 5-wire.
IGSU 14D/6.31-S12 – 50126786
Label Gap Sensor, Model No: IGSU 14D/6.31-S12, Part Number: 50126786, Series: Fork type GS 14, Principle of physics: Ultrasonic Sensor, Label width: 10 mm, Label gap: 2 mm, Supply voltage: 12 to 30 VDC, Connection: Connector type, Thread size: M12, Number of pins: 5-pin.
GS 63B/6.3-S8 – 50128004
Label Gap Sensor, Model No: GS 63B/6.3-S8, Part Number: 50128004, Series: Fork type GS 63, Principle of physics: Optical Sensor, Label width: 2 mm, Label gap: 2 mm, Light source: Infrared LED, Supply voltage: 10 to 30 VDC, Connection: Connector type, Thread size: M8, Number of pins: 4-pin.
GS 61/6D – 50110770
Label Gap Sensor, Model No: GS 61/6D, Part Number: 50110770, Series: Fork type GS 61, Principle of physics: Optical Fork Sensor, Label width: 2 mm, Label gap: 2 mm, Supply voltage: 10 to 30 VDC, Light source: Infrared LED, Connection: Cable type, Cable length: 2000 mm, Number of conductors: 5 -wire.
GS 63B/6,200-S12 – 50128002
Label Gap Sensor, Model No: GS 63B/6,200-S12, Part Number: 50128002, Series: Fork type GS 63, Principle of physics: Optical Sensor, Label width: 2 mm, Label gap: 2 mm, Light source: Infrared LED, Supply voltage: 10 to 30 VDC, Connection: Cable with Connector, Cable length: 200 mm, Thread size: M12, Number of pins: 5-pin.
The Leuze GSU14E/16T.3-M12V is an ultrasonic fork sensor part number 50142878 and is used for the detection of non-transparent and transparent labels with a minimum label width of 4mm and a minimum label gap of 2mm. It operates on the principle of ultrasonics and has a manual fine-tuning of the switching threshold with a teach input.
This sensor has a supply voltage range of 18-30V DC and an open-circuit current of 0-60mA. It has one teach input and two digital switching outputs with a maximum switching current of 100mA. The switching principles of the two outputs are IO-Link/NPN light switching for switching in the gap and PNP dark switching for switching on the label for output 1, and PNP light switching for switching in the gap and NPN dark switching for switching on the label for output 2.
The Leuze GSU14E 16T.3 M12V has a switching frequency of 2,000 Hz, a response time of 0.2ms, and a readiness delay of 300ms. It has a maximum speed of 50m/min during teach-in and a fork design with a mouth width of 4mm and a mouth depth of 80mm.
This IGSU 14DN/6D.3-S12 sensor has a metal housing made of diecast zinc with a galvanic nickel coating, and it weighs 270g. It has a male M12 connector with 5 pins, an A-coded encoding, and a vertical plug outlet perpendicular to the belt movement. It has three LED indicators and control buttons for dynamic teach on label carrier and label.