Omron E2E-X7D2-M1 Proximity Sensor
The Omron E2E-X7D2-M1 Proximity Sensor offers Inductive, M18, Shielded, 7 mm Sensing distance, M12 Connector, DC 2-wire , NC , 12 to 24 VDC Power supply voltage. Manufactured by Omron under the Omron Proximity Sensors category, this model belongs to the Omron E2E Series.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2E-X7D2-M1 |
Omron E2E-X7D2-M1 Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M18 |
| Mounting | Shielded |
| Sensing Distance | 7 mm |
| Setting Distance | 0 to 5.6 mm |
| Output Configuration | DC 2-wire |
| Operation Mode | NC |
| Connection | M12 Connector |
| Differential Travel | 15% max. of sensing distance |
| Detectable Object | Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.) |
| Standard Sensing Object | Iron, 18 x 18 x 1 mm |
| Response Frequency | 0.5 kHz |
| Control Output Residual Voltage | 3 V max. (Load current: 100 mA, Cable length: 2 m. M1J-T models only: 5 V max.) |
| Control Output Load Current | 3 to 100 mA Diagnostic output: 50 mA for -D1(5)S models |
| Indicator | Green Indicator |
| Protection Circuit | Surge suppressor, output load short-circuit protection (for control and diagnostic output) |
| Ambient Temperature Range | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
| Ambient Humidity Range | Operating/Storage: 35% to 95% (with no condensation) |
| Insulation Resistance | ±10% max. of sensing distance at 23° C in the temperature range of –25° C to 70° C |
| Dielectric Strength | 50 MΩ min. (at 500 VDC) between current-carrying parts and case |
| Vibration Resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Voltage Influence | ±1% max. of sensing distance in the rated voltage range ±15% |
| Material Case | Brass-nickel plated |
| Material Toothed Washer | Zinc-plated iron |
| Material Sensing Surface | PBT |
| Material Clamping Nut | Nickel-plated brass |
| Degree Of Protection | IEC 60529 IP67 (Pre-wired models, pre-wired connector models: JEM standard IP67g (waterproof and oil-proof)) |
| Weight | Approx. 40 g |
The Omron E2E-X7D2-M1 is often compared with other models in the E2E Proximity Sensor group due to shared installation characteristics and consistent sensing behavior. Engineers frequently evaluate Omron E2E-X10D2-M1TGJ-U 0.3M (M30, 10 mm sensing, Shielded, DC 2-Wire, NC, M12 Pre-wired Smartclick Connector, 0.3 m Length), Omron E2E-X10MY2 2M (M18, 10 mm sensing, Unshielded, AC 2-Wire, NC, Pre-wired 2 M Cable), and Omron E2E-X3D1-M1GJ (M12, 3 mm sensing, Shielded, DC 2-wire, NO, Pre-wired connector) when selecting suitable alternatives. This helps maintain compatibility when matching head size, sensor type, output logic, operation mode, and connection method. The E2E-X7D2-M1 fits smoothly into machinery, fixtures, conveyors, and automation setups requiring dependable detection from an Omron Proximity Sensor.
