Omron S8VK-WB96048 Power Supply
Omron S8VK-WB96048 SMPS is a 960 W switch mode power supply configured to deliver 48 VDC with 20 A rated output current. It accepts three-phase or two-phase 380 to 480 VAC input at 50/60 Hz. DIN rail mounting provides an organized installation format, while Push-In Plus terminals and terminal blocks provide the electrical wiring connections. Typical efficiency is specified at 96% with three-phase 400 VAC and three-phase 480 VAC input. A green LED provides output status indication. The 48 VDC output distinguishes this model from 24 VDC configurations at the same power rating. Within the S8VK-WB Series, the S8VK-WB96048 provides a DIN rail 960 W, 48 VDC configuration. Compare other 48V industrial power supplies from Omron control equipment.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8VK-WB96048 |
Omron S8VK-WB96048 Power Supply - Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 960 W |
| Output voltage | 48 VDC |
| Rated output current | 20 A |
| Terminal type | Push-in plus Terminal |
| Mounting method | DIN rail |
| Connection | Terminal blocks |
| Efficiency | 91% min., 96% typ. (at three-phase 380 VAC input) 95% typ. (at two-phase 380 VAC input) 91% min., 96% typ. (Three-phase 400 VAC input) 95% typ. (Two-phase 400 VAC input) 91% min., 96% typ. (at three-phase 480 VAC input) 95% typ. (at two-phase 480 VAC input) |
| Rated input voltage | 380 to 480 VAC (Three-phase / two-phase) |
| Rated input current | 1.8 A max., 1.7 A typ. (at three-phase 380 VAC input) 3.4 A max., 3.1 A typ. (at two-phase 380 VAC input) 1.7 A max., 1.6 A typ. (Three-phase 400 VAC input) 3.2 A max., 2.9 A typ. (Two-phase 400 VAC input) 1.5 A max., 1.3 A typ. (at three-phase 480 VAC input) 2.6 A max., 2.3 A typ. (at two-phase 480 VAC input) |
| Input Leakage current | 3.5 mA max. (Three-phase 400 VAC input) |
| Input Frequency | 50/60 Hz |
| Output indicator | Yes (LED: Green) |
| Output voltage variable range | 48 to 56 V (with V.ADJ) |
| Start-up time | 1000 ms max. (Three-phase 400 VAC input) |
| Hold time | 16 ms min., 25 ms typ. (Three-phase 400 VAC input) |
| Vibration resistance | 10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | ?40 to 70°C |
| Ambient temperature (Storage) | ?40 to 85°C |
| Ambient humidity (OperatingStorage) | 95% max. (Storage humidity: 95% max.) |
| Cooling fan | No |
| Degree of protection | IP20 by EN/IEC 60529 |
| Weight | 1800 g max. |
The Omron S8VK-WB96048 Power Supply provides 960 W rated power with a 48 VDC output and 20 A rated current. It accepts three-phase or two-phase 380 to 480 VAC input at 50/60 Hz. DIN rail mounting, Push-In Plus terminals, and terminal blocks provide a structured installation and wiring arrangement. Typical efficiency is specified at 96% with three-phase 400 VAC and three-phase 480 VAC input. These electrical values define a high-capacity 48 VDC supply where connected load voltage, total current requirement, incoming source, available rail space, and terminal access should be evaluated together. Connected equipment should require 48 VDC and keep continuous current demand within the rated 20 A output.
The 48 VDC output should be confirmed before comparing this model with 24 VDC alternatives because equal wattage does not make different output-voltage classes interchangeable. A 24 VDC model can provide a different current rating even when the overall power level is lower. Such comparisons are useful for understanding product-family range rather than direct substitution. For a 240 W DIN rail model delivering 24 VDC at 10 A, compare the Omron S8VK-WB24024.


