Omron S8VK-WB48024 Power Supply
Omron S8VK-WB48024 SMPS is a 480 W switch mode power supply configured to deliver 24 VDC with 20 A rated output current. It accepts three-phase or two-phase 380 to 480 VAC input at 50/60 Hz. DIN rail mounting provides a structured installation format for control cabinets, while push-in terminals and terminal blocks provide the input and output wiring connections. Typical efficiency is specified at 94% under several stated input conditions in the supplied data. A green LED provides output status indication. Its 24 VDC output and 20 A capacity provide twice the rated current of the 240 W WB configuration. Within the S8VK-WB Series, the S8VK-WB48024 provides a DIN rail 480 W, 24 VDC configuration. Compare other 480W industrial power supplies from Omron machine automation.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8VK-WB48024 |
Omron S8VK-WB48024 Power Supply - Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 480 W |
| Output voltage | 24 VDC |
| Rated output current | 20 A |
| Terminal type | Push-in Terminal |
| Mounting method | DIN rail |
| Connection | Terminal blocks |
| Efficiency | 90% min., 94% typ. (at three-phase 380 VAC input) 94% typ. (at two-phase 380 VAC input) 90% min., 94% typ. (Three-phase 400 VAC input) 94% typ. (Two-phase 400 VAC input) 89% min., 94% typ. (at three-phase 480 VAC input) 94% typ. (at two-phase 480 VAC input) |
| Rated input voltage | 380 to 480 VAC (Three-phase / two-phase) |
| Rated input current | 0.90 A max., 0.83 A typ. (at three-phase 380 VAC input) 1.7 A max., 1.6 A typ. (at two-phase 380 VAC input) 0.90 A max., 0.79 A typ. (Three-phase 400 VAC input) 1.6 A max., 1.5 A typ. (Two-phase 400 VAC input) 0.75 A max., 0.67 A typ. (at three-phase 480 VAC input) 1.3 A max., 1.2 A typ. (at two-phase 480 VAC input) |
| Input Leakage current | 3.5 mA max. (Three-phase 400 VAC input) |
| Input Frequency | 50/60 Hz |
| Output indicator | Yes (LED: Green) |
| Output voltage variable range | 24 to 29.5 V (with V.ADJ) |
| Start-up time | 1000 ms max. (Three-phase 400 VAC input) |
| Hold time | 16 ms min., 25 ms typ. (Three-phase 400 VAC input) |
| Vibration resistance | 10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | ?40 to 70°C |
| Ambient temperature (Storage) | ?40 to 85°C |
| Ambient humidity (OperatingStorage) | 95% max. (Storage humidity: 95% max.) |
| Cooling fan | No |
| Degree of protection | IP20 by EN/IEC 60529 |
| Weight | 1200 g max. |
The Omron S8VK-WB48024 Power Supply provides 480 W rated power with a 24 VDC output and 20 A rated current. It accepts three-phase or two-phase 380 to 480 VAC input at 50/60 Hz. DIN rail mounting, push-in terminals, and terminal blocks provide the installation and electrical connection arrangement. Typical efficiency values of 94% are specified under several of the stated input conditions. These values define a higher-current 24 VDC supply where connected load current, incoming source, available DIN rail space, and terminal access should be checked together. Connected equipment should require 24 VDC and keep continuous current demand within the rated 20 A output.
Comparison with the lower-power WB model is straightforward because both configurations use a 24 VDC nominal output. The 240 W version provides 10 A, while this 480 W model provides 20 A, making required continuous current the main electrical distinction after input compatibility is confirmed. This comparison is more useful than choosing between models based only on wattage. For a lower-capacity DIN rail configuration providing 24 VDC at 10 A, compare the Omron S8VK-WB24024.


