Omron S8VK-WB96024 Power Supply
Omron S8VK-WB96024 SMPS is a 960 W switch mode power supply designed to provide 24 VDC with 40 A rated output current. It accepts three-phase or two-phase 380 to 480 VAC input at 50/60 Hz. DIN rail mounting supports structured cabinet installation, while Push-In Plus terminals and terminal blocks provide fixed wiring connections. Typical efficiency is specified at 95% with three-phase 400 VAC input and 94% with three-phase 480 VAC input. A green LED provides output status indication. Within the S8VK-WB Series, the S8VK-WB96024 provides a DIN rail 960 W, 24 VDC configuration. Compare other 960W industrial power supplies from Omron industrial automation.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8VK-WB96024 |
Omron S8VK-WB96024 Power Supply - Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 960 W |
| Output voltage | 24 VDC |
| Rated output current | 40 A |
| Terminal type | Push-in plusTerminal |
| Mounting method | DIN rail |
| Connection | Terminal blocks |
| Efficiency | 90% min., 95% typ. (at three-phase 380 VAC input) 95% typ. (at two-phase 380 VAC input) 91% min., 95% typ. (Three-phase 400 VAC input) 95% typ. (Two-phase 400 VAC input) 90% min., 94% typ. (at three-phase 480 VAC input) 95% typ. (at two-phase 480 VAC input) |
| Rated input voltage | 380 to 480 VAC (Three-phase / two-phase) |
| Rated input current | 1.8 A max., 1.7 A typ. (at three-phase 380 VAC input) 3.4 A max., 3.2 A typ. (at two-phase 380 VAC input) 1.8 A max., 1.6 A typ. (Three-phase 400 VAC input) 3.2 A max., 3.0 A typ. (Two-phase 400 VAC input) 1.5 A max., 1.3 A typ. (at three-phase 480 VAC input) 2.6 A max., 2.4 A typ. (at two-phase 480 VAC input) |
| Input Leakage current | 3.5 mA max. (Three-phase 400 VAC input) |
| Input Frequency | 50/60 Hz |
| Output indicator | Yes (LED: Green) |
| Output voltage variable range | 24 to 29.5 V (with V.ADJ) |
| Start-up time | 1000 ms max. (Three-phase 400 VAC input) |
| Hold time | 16 ms min., 20 ms typ. (Three-phase 400 VAC input) |
| Vibration resistance | 10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | ?40 to 70°C |
| Ambient temperature (Storage) | ?40 to 85°C |
| Ambient humidity (OperatingStorage) | 95% max. (Storage humidity: 95% max.) |
| Cooling fan | No |
| Degree of protection | IP20 by EN/IEC 60529 |
| Weight | 1800 g max. |
The Omron S8VK-WB96024 Power Supply provides 960 W rated power with a 24 VDC output and 40 A rated current. It accepts three-phase or two-phase 380 to 480 VAC input at 50/60 Hz. DIN rail mounting, Push-In Plus terminals, and terminal blocks provide the installation and wiring arrangement for industrial control cabinets. Typical efficiency is specified at 95% with three-phase 400 VAC input and 94% with three-phase 480 VAC input. These values define a high-capacity 24 VDC supply where connected load voltage, total current demand, source compatibility, DIN rail space, and terminal access should be considered together. Connected equipment should require 24 VDC and keep continuous current demand within the rated 40 A output.
The input range describes source compatibility separately from the 24 VDC requirement of downstream equipment. Comparing models with the same output voltage allows current capacity and wattage to become the main electrical differences. A lower-power 24 VDC model can be selected when the connected load does not require the full 40 A capacity. For a lower-capacity DIN rail model providing 24 VDC at 20 A, compare the Omron S8VK-X48024-EIP.


