+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VK-X06012-EIP Power Supply

Omron S8VK-X06012-EIP SMPS is a 60 W switch mode power supply configured to provide 12 VDC with 4.5 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for structured panel installation. Push-In Plus terminals and terminal blocks provide fixed electrical connections for incoming power and the DC output circuit. Typical efficiency is specified at 85% with 115 VAC input and 86% with 230 VAC input. A green LED provides output status indication. The 12 VDC output separates this configuration from 5 VDC and 24 VDC models in the same family. Within the S8VK-X Series, the S8VK-X06012-EIP provides a DIN rail 60 W, 12 VDC configuration. Compare other 12V industrial power supplies from Omron machine automation.

Omron S8VK-X06012-EIP Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VK-X06012-EIP

Omron S8VK-X06012-EIP Power Supply - Technical Specifications

SpecificationValue
Power rating60 W
Output voltage12 VDC
Rated output current4.5 A
Terminal typePush-in plus Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency85% typ. (at 115 VAC input) 86% typ. (at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current0.99 A typ. (at 115 VAC input) 0.61 A typ. (at 230 VAC input)
Input Leakage current0.5 mA max. (at 115 VAC input) 1 mA max. (at 230 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (LED: Green)
Output voltage variable range10.8 to 14 V (With V.ADJ)
Start-up time1000 ms max. (at 115 VAC input) 1000 ms max. (at 230 VAC input)
Hold time20 ms typ. (at 115 VAC input) 110 ms typ. (at 230 VAC input)
Vibration resistance10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)?40 to 70°C
Ambient temperature (Storage)?40 to 85°C
Ambient humidity (OperatingStorage)95% max. (Storage humidity: 95% max.)
Cooling fanNo
Degree of protectionIP20 by EN/IEC 60529
Weight250 g max.

The Omron S8VK-X06012-EIP Power Supply provides 60 W rated power with a 12 VDC output and 4.5 A rated current. It accepts 100 to 240 VAC at 50/60 Hz and uses DIN rail mounting with Push-In Plus terminals and terminal blocks for installation and wiring. Typical efficiency is specified at 85% with 115 VAC input and 86% with 230 VAC input. These electrical values define a 12 VDC configuration where connected load voltage, total current demand, input-source compatibility, available rail space, and terminal access should be considered together. Connected equipment should require 12 VDC and keep continuous current demand within the rated 4.5 A output.

Models with the same 60 W power rating can use different output voltages and therefore different current ratings. A 24 VDC version should not be treated as a direct substitute for equipment requiring 12 VDC even when mounting and input characteristics are similar. Comparing the two shows how output voltage changes the available current within the same general power level. For a 60 W DIN rail model delivering 24 VDC at 2.5 A, compare the Omron S8VK-X06024-EIP.