+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VK-G48048 Power Supply

Omron S8VK-G48048 SMPS is a 480 W switch mode power supply configured to provide 48 VDC with 10 A rated output current. It accepts single-phase 85 to 264 VAC or 90 to 350 VDC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for panel wiring. Efficiency is specified at 93%, and a green LED provides output-status indication. The enclosure carries an IP20 protection rating. The 48 VDC output distinguishes this model from 24 VDC configurations with the same rated power. Within the S8VK-G Series, the S8VK-G48048 provides a 480 W, 48 VDC configuration. Compare other 48V industrial power supplies from Omron control equipment.

Omron S8VK-G48048 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VK-G48048

Omron S8VK-G48048 Power Supply - Technical Specifications

SpecificationValue
Power rating480 W
Output voltage48 VDC
Rated output current10 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency93%
Rated input voltageSingle-phase, 85 to 264 VAC, 90 to 350 VDC
Rated input current4.7 A typ. (at 115 VAC input) 2.3 A typ. (at 230 VAC input)
Input Leakage current0.3 mA typ. (at 115 VAC input) 0.49 mA typ. (at 230 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (LED: Green)
Output voltage variable range?10% to 15% (with V. ADJ)
Start-up time380 ms typ. (at 115 VAC input) 260 ms typ. (at 230 VAC input)
Hold time41 ms typ. (at 115 VAC input) 50 ms typ. (at 230 VAC input)
Vibration resistance10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)?40 to 70°C
Ambient temperature (Storage)?40 to 85°C
Ambient humidity (OperatingStorage)95% max. (Storage humidity: 95% max.)
Cooling fanNo
Degree of protectionIP20 by EN/IEC 60529
Weight1500 g max.

The Omron S8VK-G48048 Power Supply provides 480 W rated power with a 48 VDC output and 10 A rated current. It accepts single-phase 85 to 264 VAC or 90 to 350 VDC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for panel installation. Efficiency is specified at 93%, while a green LED provides output-status indication. The enclosure carries an IP20 protection rating. These electrical values identify a higher-power 48 VDC configuration where connected load voltage, current demand, source compatibility, available rail space, and terminal access should be considered together. Connected equipment should require 48 VDC and keep combined current demand within the rated 10 A output. The incoming supply range and outgoing DC specification should be checked independently because they describe different sides of the power supply. Models sharing a 480 W rating can provide different voltage and current combinations, so wattage alone does not establish compatibility. A 24 VDC model should not replace this unit for equipment requiring 48 VDC, even when current or power values appear similar. For a 240 W DIN rail model providing 24 VDC at 10 A, compare the Omron S8VK-S24024.